Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[STDS-802-11] 2022 March 802 Electronic Plenary: 802.11 PAR Review SC Feedback on 802 PARs under-consideration



--- This message came from the IEEE 802.11 Working Group Reflector ---
Greetings,
The 802.11 PAR Review SC  has captured its feedback on 802 PARs under-consideration in doc 11-22/0268r2:
https://mentor.ieee.org/802.11/dcn/22/11-22-0268-02-0PAR-par-review-sc-meeting-agenda-and-comment-slides-march-2022-electronic-plenary.pptx

1.802.3dg - Amendment: Physical Layer Specifications and Management Parameters for 100Mb/s Operation and Associated Power Delivery over a Single Balanced Pair of Conductors, PAR and CSD
Slide 18 - Comments on 802.3dg:

1.2 Title – need space between 100 and Mb/s.  “100 Mb/s”

1.2 Title – remove “IEEE” from first word.

5.2b – remove unwarranted “PHY” Acronym: suggest change to “Specify additions to and appropriate modifications of IEEE Std 802.3 to add 100 Mb/s Physical Layer (PHY) specifications and management parameters for operation, and associated optional provision of power, using a single balanced pair of conductors.

5.4 – Change “IEEE 802.3” to “IEEE Std 802.3” and add full name to list in 8.1

8.1 list names of standards cited.

CSD: no comments

2.802-Rev - Standard - Overview and Architecture, PAR Revision
Slide 19 - Comments on 802-Rev:

5.6 Change “Standards developers within IEEE 802. Manufacturers, distributors, and users of products and services that conform to the LAN, MAN, and PAN standards developed by IEEE 802.”

To

  “Standards developers, manufacturers, distributors, and users of products and services that use or conform to IEEE 802 standards.”

3.802.1Qdt - Amendment: Priority-based Flow Control Enhancements, PAR and CSD
Slide 20 - Comments on 802.1Qdt:

2.1 delete “IEEE”

5.2.b Please remove “This amendment also addresses errors and omissions in the description of existing IEEE Std 802.1Q functionality.” this leaves the project open ended. As a compromise change to “This amendment also addresses errors of the existing IEEE Std 802.1Q functionality.”

4.802.1DU - Standard for Cut-Through Forwarding Bridges and Bridged Networks, PAR and CSD
Slide 21 - Comments on 802.1DU

2.1 should the title not include “Standard for”? Was this PAR form not generated by the myProject tool?

5.4 suggested change “This standard enables communication delays lower than achievable by Bridges and bridged networks solely supporting store-and-forward operations.”

TO

  “This standard enables reduced communication delays lower than achievable by Bbridges and bridged networks solely supporting store-and-forward operations.”

The quantitative value of the reduction should be included.

CSD: No Comments

5.802.15.6ma - Standard -  Wireless Body Area Networks, PAR Revision and CSD
Slide 22-25 - See slide deck.
doc 11-22/0268r2:
 
6.802.15.12 - Upper Layer Interface (ULI) for IEEE 802.15.4 Low-Rate Wireless Networks, PAR Withdrawal
No Comment
7.802.15.6a - Amendment: Dependable Human and Vehicle Body Area Networks, PAR Withdrawal and CSD
Slide 27 - Comments on 802.15.6a PAR Withdrawal

PAR Withdrawal Additional Information:

 Change to : “P802.15.6a is an amendment to IEEE Std 802.15.6-2012, which will expire at the end of 2022 without a revision. The 802.15 WG wishes to continue the new project features as part of the new revision project.”

We also reviewed two 802.3 PARs submitted under the 48 Hour rule, and we have no comments on those PARs/CSDs.

Respectfully submitted,
Jon Rosdahl
802.11 PAR Review SC Chair
-----------------------------------------------------------------------------
Jon Rosdahl                             Engineer, Senior Staff
IEEE 802 Executive Secretary   Qualcomm Technologies, Inc.
office: 801-492-4023                  10871 North 5750 West
cell:   801-376-6435                   Highland, UT 84003

A Job is only necessary to eat!

A Family is necessary to be happy!!

To unsubscribe from the STDS-802-11 list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11&A=1