| Thread Links | Date Links | ||||
|---|---|---|---|---|---|
| Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
--- This message came from the IEEE 802.11 Working Group Reflector ---Hi All,
During last week's TGm call, we discussed the resolution for CID 1011 and made a few live updates to the proposed text. Shown below is the text that we ended up with during the call. I’d like to check if there are any further opinion/suggestions related to this text.
-------
The Operating Class and Primary Channel subfields are present if the FILS Discovery frame is transmitted in a non-HT duplicate PPDU. When present, the fields indicate the following:
· If the operating class has a channel spacing other than 80 MHz
· Operating bandwidth of the BSS (which equals to the channel spacing of the operating class)
· Center frequency of the BSS
· The center frequency of the primary channel
· If the operating class has a channel spacing of 80 MHz
· Operating bandwidth of the BSS is either 80 MHz or 80+80 MHz
· Center frequency of the primary 80 MHz channel
· The center frequency of the primary channel
NOTE 1 – If a received FILS Discovery frame does not include the Primary Channel subfield, the primary channel is the channel on which the PPDU was received.
NOTE 2 – A STA that receives a FILS Discovery frame containing an Operating Class subfield indicating a channel spacing of 80 MHz can determine the operating bandwidth of the BSS by receiving a Beacon or a Probe Response frame on the primary channel indicated in the FILS Discovery frame.
-------
Is there a strong opinion against removing the 2nd sub-bullet (related to ‘Center frequency’)?
Regards,
Abhi
To unsubscribe from the STDS-802-11 list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11&A=1
To unsubscribe from the STDS-802-11 list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11&A=1