Re: [STDS-802-11] Channel Switch Count question/suggested change in REVme

["Lumbatis, Kurt" <kurt.lumbatis@xxxxxxxxxxxxx>]

--- This message came from the IEEE 802.11 Working Group Reflector ---

I am fine with those changes.

 

Kurt Lumbatis

Distinguished Software Engineer

DOCSIS CPE R&D SW Architecture (Wi-Fi)

 

ARRIS AND RUCKUS HAVE JOINED COMMSCOPE

 

3871 Lakefield Dr, Suwanee, GA 30024 USA

Office: +01-678-473-2921

 

From: Mark Hamilton <mark.hamilton2152@xxxxxxxxx>
Sent: Saturday, August 27, 2022 3:51 PM
To: STDS-802-11@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11] Channel Switch Count question/suggested change in REVme

 

 

--- This message came from the IEEE 802.11 Working Group Reflector ---

All,

 

I’m looking for those interested in Channel Switch Announcement procedures, to consider a change being proposed in REVme (see below).

 

Does anyone have a comment/concern with this proposed change?

 

Thanks.  Mark

 

 

1812

Mark RISON

2799.35

11.8.8.2

"When the AP sets the Channel Switch Count field of the Channel Switch Announcement element to 0, it shall not include a Max Channel Switch Time element in a Beacon or Probe Response frame(#6)." -- why not?  Even if you have to switch immediately, the AP might not be available on the new channel for a while

Delete the cited text

 

---

To unsubscribe from the STDS-802-11 list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11&A=1

---

To unsubscribe from the STDS-802-11 list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11&A=1