RE: stds-802-16-mobile: Handoff and Sleep Mode Ad-hoc: Continuation of discussion
Dear Changhoi,
You can find the document in the TGe upload directory.
The document is a very initial draft which I have uploaded after the previous
meeting for a basis for discussion.
I'm working on a new revision, which will contain some of the decision we have made and some proposals, with the main purpose of being an working document for the following discussion.
I didn't forget your questions, just waiting to finish my document for easier discussion.
Regards,
Itzik.
> -----Original Message-----
> From: Changhoi Koo [mailto:chkoo@samsung.com]
> Sent: Wednesday, June 18, 2003 11:49
> To: Itzik Kitroser; Ofer Kelman; stds-802-16-mobile@ieee.org
> Subject: Re: stds-802-16-mobile: Handoff and Sleep Mode Ad-hoc:
> Continuation of discussion
>
>
> Dear Itzik and all
> I'd like to ask where can I get the document, IEEE C802.16x-02/NNr0 ..
> Thanks
>
> ----- Original Message -----
> From: "Itzik Kitroser" <itzikk@runcom.co.il>
> To: "Ofer Kelman" <okelman@Airspan.com>; <stds-802-16-mobile@ieee.org>
> Sent: Wednesday, June 18, 2003 5:11 PM
> Subject: RE: stds-802-16-mobile: Handoff and Sleep Mode Ad-hoc:
> Continuation of discussion
>
>
> > Ofer,
> > Your suggestion sounds logical and if there is not principle
> disagreement, we can make the change.
> >
> > Itzik.
> >
> > > -----Original Message-----
> > > From: owner-stds-802-16-mobile@majordomo.ieee.org
> > > [mailto:owner-stds-802-16-mobile@majordomo.ieee.org]On Behalf Of Ofer
> > > Kelman
> > > Sent: Wednesday, June 18, 2003 01:50
> > > To: stds-802-16-mobile@ieee.org
> > > Subject: RE: stds-802-16-mobile: Handoff and Sleep Mode Ad-hoc:
> > > Continuation of discussion
> > >
> > >
> > > Itzik and all,
> > >
> > > Referring the IEEE C802.16x-02/NNr0 document paragraph 6.2.2.3.43
> > > table 56ad:
> > >
> > > Configuration Change Count within the neighbor loop seems to me
> > > as taking the Change Count concept one step too far...
> > > I would suggest a message level Count that will enable the
> > > receiving BS to immediately identify whether there is anything
> > > new in the message that requires decoding it.
> > > The rate of changes with the BS topology and configuration is so
> > > slow (take days to install a Base Station) so that most of the
> > > NBR-ADV messages will be ignored anyway.
> > >
> > > Regards
> > > Ofer
> > >
> > >
> >
> >
> >
> >
> >
>