RE: stds-802-16-mobile: Handoff and Sleep Mode Ad-hoc: Continuation of discussion
Changhoi,
It is on the upload directory of the 16e
under
http://wirelessman.org/tge/index.html you will find a link to 802.16 TGe Upload Directory
Ofer
-----Original Message-----
From: Changhoi Koo [mailto:chkoo@samsung.com]
Sent: Wednesday, June 18, 2003 12:49 PM
To: Itzik Kitroser; Ofer Kelman; stds-802-16-mobile@ieee.org
Subject: Re: stds-802-16-mobile: Handoff and Sleep Mode Ad-hoc:
Continuation of discussion
Dear Itzik and all
I'd like to ask where can I get the document, IEEE C802.16x-02/NNr0 ..
Thanks
----- Original Message -----
From: "Itzik Kitroser" <itzikk@runcom.co.il>
To: "Ofer Kelman" <okelman@Airspan.com>; <stds-802-16-mobile@ieee.org>
Sent: Wednesday, June 18, 2003 5:11 PM
Subject: RE: stds-802-16-mobile: Handoff and Sleep Mode Ad-hoc: Continuation of discussion
> Ofer,
> Your suggestion sounds logical and if there is not principle disagreement, we can make the change.
>
> Itzik.
>
> > -----Original Message-----
> > From: owner-stds-802-16-mobile@majordomo.ieee.org
> > [mailto:owner-stds-802-16-mobile@majordomo.ieee.org]On Behalf Of Ofer
> > Kelman
> > Sent: Wednesday, June 18, 2003 01:50
> > To: stds-802-16-mobile@ieee.org
> > Subject: RE: stds-802-16-mobile: Handoff and Sleep Mode Ad-hoc:
> > Continuation of discussion
> >
> >
> > Itzik and all,
> >
> > Referring the IEEE C802.16x-02/NNr0 document paragraph 6.2.2.3.43
> > table 56ad:
> >
> > Configuration Change Count within the neighbor loop seems to me
> > as taking the Change Count concept one step too far...
> > I would suggest a message level Count that will enable the
> > receiving BS to immediately identify whether there is anything
> > new in the message that requires decoding it.
> > The rate of changes with the BS topology and configuration is so
> > slow (take days to install a Base Station) so that most of the
> > NBR-ADV messages will be ignored anyway.
> >
> > Regards
> > Ofer
> >
> >
>
>
>
>
>