Re: [STDS-802-16-MOBILE] [Handoff] Multiple frequency assignment for the same sector (BS)
Thanks for the observation Jay Jin. I agree.
Thanks,
Phil
----- Original Message -----
From: "jay_Áø¿ë¼®" <jayjay@LGE.COM>
To: <STDS-802-16-MOBILE@LISTSERV.IEEE.ORG>
Sent: Tuesday, June 08, 2004 7:32 PM
Subject: Re: [STDS-802-16-MOBILE] [Handoff] Multiple frequency assignment
for the same sector (BS)
> Dear Mary, Lalit and all.
>
> I like that a sector has a single FA, of course single DCD.( as in option
2
> ) therefore, I think we don't need any new ID to identity the sector which
> can be identified by BS_ID and Sector_ID.
>
> Best Regard
>
> Jay jin
>
> -----Original Message-----
> From: owner-stds-802-16-mobile@LISTSERV.IEEE.ORG
[mailto:owner-stds-802-16-
> mobile@LISTSERV.IEEE.ORG]
> Sent: Wednesday, June 09, 2004 12:01 AM
> To: STDS-802-16-MOBILE@LISTSERV.IEEE.ORG
> Subject: Re: [STDS-802-16-MOBILE] [Handoff] Multiple frequency assignment
> for the same sector (BS)
>
> Mary,
>
> Thanks for clearly identifying and stating possible options. I like option
> 2, which is in line with current definition of BS and Sector in 802.16
> domain unless option1 has major advantages over option2.
>
> Lalit
>
> -----Original Message-----
> From: owner-stds-802-16-mobile@LISTSERV.IEEE.ORG on behalf of Mary
> Chion
> Sent: Mon 6/7/2004 11:04 PM
> To: STDS-802-16-MOBILE@LISTSERV.IEEE.ORG
> Cc:
> Subject: [STDS-802-16-MOBILE] [Handoff] Multiple frequency
> assignment for the same sector (BS)
>
>
> All,
>
> This is a recap of the discussion for the multiple frequency
> assignement of the same sector. There are two options to handle this
> configuration:
>
> Option 1:
> Change the definition of a sector to allow multiple frequency
> assignments. This implies to change DCD message to include multiple FA_IDs
> and allow a handover type of intra-sector inter-frequency handoff.
>
> Option 2:
> The sector definition remains the same: a sector of single
> frequency assignment. The DCD message remains to include one FA_ID. For
> multiple frequency assignement for the same sector, each frequency channel
> will be the treated as a sector, hence, the identity of a sector should be
> defined as: BS ID, sector ID and FA_ID. The handover between frequencies
> can be treated the same as inter-sector inter-frequency handoff.
>
> Please provide your comments and hopefully, we can agree on one
> option.
>
> Mary Chion
>