stds-802-16: Deadline: Call for Reply-Comments: Working Group Review of IEEE802.16ab-01/01r2
Please remember that tomorrow is the deadline for reply comments.
I have reply comments from four people. They were all formatted
correctly, so I guess the instructions are easier to follow this time.
In order for Commentary to display multiple replies, I had to develop
a new version 1.5. Over the weekend, I will post the reply data
embedded in a Commentary 1.5 update file.
Roger
>IEEE 802.16 is now in the process of soliciting and collecting
>responses to the comments in the following report:
>
>Title: Comment Report: Working Group Review of IEEE 802.16ab-01/01r2
>Document Number: IEEE 802.16-01/53
>URL: <http://ieee802.org/16/docs/01/80216-01_53.zip>
>
>These comments were originally collected in the review of 802.16ab-01/01r2:
> <http://ieee802.org/16/tg3_4/docs/80216ab-01_01r2.zip>.
>
>Replies are due by Friday, November 2 ("anywhere in the world").
>
>Here is how to create and submit reply comments. PLEASE FOLLOW THESE
>INSTRUCTIONS EXACTLY OR EXPECT TO HAVE YOUR INPUT IGNORED.
>
>(1) Obtain Commentary <http://ieee802.org/16/docs/Commentary>.
>
>(2) Install the comment database (IEEE 802.16-01/53); for instructions, see:
> <http://ieee802.org/16/arc/802-16list2/msg00272.html>
>
>(3) Read the comments in Commentary. When you want to respond to a
>comment, check the "Marked" at the top of that record. Then fill out
>the following fields:
>
>Recommendation:
>Proposed Resolution:
>Reason for Recommendation:
>
>You are fully justified in recommending rejection on grounds of
>incompleteness of lack of a specific change request.
>
>(4) When you are finished entering replies, look under Scripts and
>choose "Find Marked Records". This will find the records for which
>you checked the "Marked" box.
>
>(5) Put your name in the "Recommendation by" field of each reply
>{for a quick method, see Appendix at the end of this note.}
>
>(6) Under Scripts, choose "Export Clause Editor's Proposals". Choose
>the file type "FileMaker Pro Runtime Files". Enter a file name of
>the form "802.16ab_reply_Name.fp5", where "Name" is your name.
>
>(7) Email the exported file as an attachment to <mailto:marks@nist.gov>.
>
>(8) Don't forget the deadline of Friday November 2.
>
>(9) A database of replies should be available by Monday November 5.
>
>(10) The creator of each original comment will be offered the
>opportunity to generate a draft comment resolution and to lead the
>resolution at Session #16.
>
>
>Dr. Roger B. Marks <mailto:marks@nist.gov>
>Chair, IEEE 802.16 WG on Broadband Wireless Access <http://WirelessMAN.org>
>National Wireless Electronic Systems Testbed (N-WEST)
>National Institute of Standards and Technology/Boulder, CO
><http://www.nist.gov>
>tel: +1 303 497 3037 fax: +1 303 497 7828
>
>---------------
>
>Appendix: Using "Replace" in Commentary
>
>You can replace everything in a particular field over a batch of
>records. For example, clause editors might not want to type their
>name in the the "Recommendation by" field each time. Here is a
>solution to the problem illustrating the use of "Replace":
>
>*Finish entering your data.
>*Find the batch of records in which you want to replace a field.
>*In browse mode, and put the cursor in the "Recommendation by" field.
>*Under "Records", choose "Replace".
>*Choose "Replace with calculated result".
>*In the box, write, in quotation marks, your name. Click "OK".
>*Click "Replace".