stds-802-16: New Comment Database: Call for Comments on Editor's DraftConsolidation of IEEE 802.16/802.16a/802.16c
One late comment (#192) has been added to the Consolidation comment
database. IEEE 802.16-03/39r1 is here:
http://ieee802.org/16/docs/03/80216-03_39r1.zip
>We received 190 comments in response to the "Call for Comments on
>Editor's Draft Consolidation of IEEE 802.16/802.16a/802.16c":
> http://ieee802.org/16/arc/802-16list2/msg00967.html
>
>The comments are posted as IEEE 802.16-03/39:
> http://ieee802.org/16/docs/03/80216-03_39.zip
>
>These comments are to be resolved by TGd at Session #27.
>
>See below for the Call for Reply Comments.
>
>Email service has been poor the past few days. If your ballot and/or
>comments were emailed by the deadline but have not been included, I
>suggest that you upload them to <http://tgd.wirelessman.org>.
>
>Roger
>
>
>CALL FOR REPLY COMMENTS
>
>Replies are due by Friday 5 September AOE (Anywhere on Earth).
>
>To create and submit reply comments:
>
>(1) Obtain Commentary <http://ieee802.org/16/docs/Commentary>.
>
>(2) Unzip the Comment Report to get a ".USR" file, which will open
>in Commentary.
>
>(3) Read the comments in Commentary. When you want to respond to a
>comment, check "Marked" at the top of that record. Then fill out the
>following fields:
>
>Recommendation:
>Proposed Resolution:
>Reason for Recommendation:
>
>You are justified in recommending rejection on grounds of
>incompleteness or lack of a specific change request.
>
>(4) When you are finished entering replies, look under Scripts and
>choose "Find Marked Records". This will find the records for which
>you checked the "Marked" box.
>
>(5) Put your name in the "Recommendation by" field of each reply
>{for a quick method, see Appendix at the end of this note.}
>
>(6) Under Scripts, choose "Export Clause Editor's Proposals". Choose
>the file type "FileMaker Pro Runtime Files". Enter a file name of
>the form "Consolidation_reply_Name.USR", where "Name" is your name.
>
>(7) Email the exported file as an attachment to
><mailto:ballot16d@wirelessman.org>.
>
>(8) Don't forget the deadline.
>
>(9) The creator of each original comment will be offered the
>opportunity to generate a draft comment resolution and to lead the
>comment resolution during discussion in the session (or appoint an
>alternative person to do so).
>
>Dr. Roger B. Marks <mailto:marks@nist.gov>
>Chair, IEEE 802.16 WG on Broadband Wireless Access <http://WirelessMAN.org>
>National Institute of Standards and Technology/Boulder, CO
><http://www.nist.gov>
>tel: +1 303 497 3037 fax: +1 303 497 7828
>
>---------------
>
>Appendix: Using "Replace" in Commentary
>
>You can replace everything in a particular field over a batch of
>records. For example, clause editors might not want to type their
>name in the the "Recommendation by" field each time. Here is a
>solution to the problem illustrating the use of "Replace":
>
>*Finish entering your data.
>*Find the batch of records in which you want to replace a field.
>*In browse mode, and put the cursor in the "Recommendation by" field.
>*Under "Records", choose "Replace".
>*Choose "Replace with calculated result".
>*In the box, write, in quotation marks, your name. Click "OK".
>*Click "Replace".