Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-16] Request for clarification: Idle mode retain information Bit #6



I think that setting Bit#6 to '1' is just like setting Bits#0-5 to '1' PLUS
it includes retention of other stateful elements like MAC state machines,
counters, CS classifiers, etc...

So when Bit#6 is set to '1', the values for all other Bits are meaningless.

Thanks,
Phil

----- Original Message -----
From: "Moo Ryong Jeong" <jeong@docomolabs-usa.com>
To: <ronnykim@lge.com>; <cyberk@kt.co.kr>;
<pbarber@BROADBANDMOBILETECH.COM>; <jungje.son@samsung.com>;
<csyoon@etri.re.kr>; <mhfong@nortelnetworks.com>;
<STDS-802-16@listserv.ieee.org>
Cc: "Toshiro Kawahara" <kawahara@docomolabs-usa.com>
Sent: Tuesday, November 02, 2004 4:26 PM
Subject: Request for clarification: Idle mode retain information Bit #6


Hi all,

Can anybody clarify the usage of idle mode retain information Bit #6?

When the bit is set (to 1), is it possible for any other bit (that is,
any of the Bits #0-#5) to be unset?

The answer appears dependent on the interpretation of the term "Full
service." If "Full service" excludes the services associated with
SBC-REQ/RSP, PKM-REQ/RSP, REG-REQ/RSP, Network Address, Time of Day, and
TFTP (as opposed to the meaning of "Full service"), then the answer
would be YES. Otherwise (that is, if it includes all the services
related with Bits #0-#5 and possibly something more), the answer would
be NO.

Thanks,

Jeong

--
Moo Ryong Jeong, Ph. D
DoCoMo Communications Laboratories USA, Inc.
181 Metro Drive, Suite 300
San Jose, CA 95110, USA
(408) 451-4761 Tel
(408) 573-1090 Fax

**********************Confidentiality Note**********************
Privileged/Confidential Information may be contained in this e-mail and
any attachment to it and may be covered by existing non-disclosure or
confidentiality agreements. If you are not the addressee (or authorized
to receive for the addressee), you may not use, copy or disclose to
anyone any information contained in this e-mail.  If you have received
this e-mail in error, please notify the sender immediately by reply
e-mail
and delete it from your system. Thank you very much.
*************************************************************