Re: [STDS-802-16] Call for Reply Comments regarding comments received for Maintenance Task Group
Good point.
You can use the script "unmark found records" before you get started.
Roger
At 11:50 -0500 2004-11-08, Peiying Zhu wrote:
>Hi, Roger:
>
>All the comments in .D5 are marked already. How do we marked it
>again when we make reply comments? Do you want us to un-mark the
>ones which we do not make any reply comments?
>
>Regards,
>
>Peiying
>
>-----Original Message-----
>From: owner-stds-802-16@listserv.ieee.org
>[<mailto:owner-stds-802-16@listserv.ieee.org>mailto:owner-stds-802-16@listserv.ieee.org]
>On Behalf Of Roger B. Marks
>Sent: Thursday, November 04, 2004 1:20 AM
>To: STDS-802-16@listserv.ieee.org
>Subject: [STDS-802-16] Call for Reply Comments regarding comments
>received for Maintenance Task Group
>
>
>The Maintenance Task Group Call for Comments has closed. The new
>Comment Report is at:
>
><http://ieee802.org/16/maint/docs/80216maint-04_04r5.zip>http://ieee802.org/16/maint/docs/80216maint-04_04r5.zip
>
>This note is a Call for Reply Comments regarding these comments,
>with a deadline of Tuesday 9 November AOE. The instructions are
>below.
>
>When the database opens, the only records found are the Marked ones.
>These are the only ones open to Reply Comments.
>
>Keep in mind that some of these comments may yet be ruled out of
>scope. You are welcome to suggest this in your reply comments.
>
>Roger
>
>----------------
>To create and submit reply comments:
>
>(1) Obtain Commentary
><<http://ieee802.org/16/docs/Commentary>http://ieee802.org/16/docs/Commentary>,
>if you don't have it.
>
>(2) Unzip the Comment Report to get a ".USR" file, which will open
>in Commentary.
>
>(3) Read the comments in Commentary. When you want to respond to a
>comment, check the "Marked" box at the top of that record. Then fill
>out the following fields:
>
>Recommendation by:
>Recommendation:
>Proposed Resolution:
>Reason for Recommendation:
>
>You are justified in recommending rejection on grounds of
>incompleteness or lack of a specific change request.
>
>(4) When you are finished entering replies, look under Scripts and
>choose "Find Marked Records". This will find the records for which
>you checked the "Marked" box. Only the found records will be
>exported in Step (5). Don't include records on which you have no
>reply comment.
>
>(5) Under Scripts, choose "Export Clause Editor's Proposals". Choose
>the file type "FileMaker Pro Runtime Files". Enter a file name of
>the form "Maint_reply_Name.USR", where "Name" is your name.
>
>(6) Upload the exported file to
><<http://maint.wirelessman.org>http://maint.wirelessman.org>.
>
>Dr. Roger B. Marks <<mailto:marks@nist.gov>mailto:marks@nist.gov>
>+1 303 497 7837 National Institute of Standards and
>Technology/Boulder, CO, USA Chair, IEEE 802.16 Working Group on
>Broadband Wireless Access
>
> <<http://WirelessMAN.org>http://WirelessMAN.org>