[STDS-802-16] Ranging correction retries

[Héctor Rubén Alba Díaz <hralba@CETECOM.ES>]

Dear all,

 

In page 178 of P802.16-2004/Cor1/D3, it is stated that the default value for the Ranging Correction Retries is 16. However, no minimum nor maximum value is specified. I would appreciate if somebody could clarify whether this means that whichever value for this parameter is correct or, otherwise, to give me some advise on it.

 

Thank you very much in advance.

 

Best regards,

 

 

Hector Alba 
Test Engineer

Telecommunications Division
CETECOM - Spain 
Phone: +34 952.619.315   -  Email: hralba@cetecom.es    -   Fax: +34 952.619.113

 

INFORMACIÓN IMPORTANTE
La información contenida en este e-mail va dirigida únicamente a su destinatario y podría contener información confidencial, si Ud. no es el destinatario indicado, no debe copiar, distribuir, o llevar a cabo ninguna acción con el mismo. Si hubiera recibido este e-mail, por error, por favor notifíquenos inmediatamente por e-mail o teléfono.

IMPORTANT NOTICE
The information contained in this e-mail is intended for the named recipients only. It may contain privileged and confidential information and if you are not the intended recipient you must not copy, distribute or take any action in reliance upon it. If you have received this e-mail in error, please notify us immediately by e-mail or telephone.