Dear
All,
I would appreciate
some feedback on this question.
Thanks and best
regards,
Héctor
Dear
all,
In page 178 of
P802.16-2004/Cor1/D3, it is stated that the default value for the Ranging
Correction Retries is 16. However, no minimum nor maximum value is specified.
I would appreciate if somebody could clarify whether this means that
whichever value for this parameter is correct or, otherwise, to give me some
advise on it.
Thank you very
much in advance.
Best
regards,
Hector Alba Test Engineer
Telecommunications Division CETECOM - Spain Phone: +34
952.619.315 - Email: hralba@cetecom.es
- Fax: +34 952.619.113
INFORMACIÓN
IMPORTANTE La información contenida en este e-mail va dirigida
únicamente a su destinatario y podría contener información confidencial, si
Ud. no es el destinatario indicado, no debe copiar, distribuir, o llevar a
cabo ninguna acción con el mismo. Si hubiera recibido este e-mail, por error,
por favor notifíquenos inmediatamente por e-mail o teléfono.
IMPORTANT NOTICE The information contained in
this e-mail is intended for the named recipients only. It may contain
privileged and confidential information and if you are not the intended
recipient you must not copy, distribute or take any action in reliance upon
it. If you have received this e-mail in error, please notify us immediately by
e-mail or telephone.
|