Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-16] [STDS-802-16m] Revised raaporteur instructions



In the last session of 802.16m, we established two new Rapporteur groups to look at the downlink PHY contributions from that session and tasked then to create some draft SDD text.  Those appointments and instructions were done via TGm document IEEE 802.16m-015.

 

This message is to notify you of a revision to those instructions, IEEE 802,16m-08/015r1, which was posted yesterday to the 802.16 web site http://www.ieee802.org/16/tgm/docs/80216m-08_015r1.pdf.

 

In order to simplify a lot of logistics and document tracking issues, the primary changes have to do with the procedure for posting contributions to the Rapporteur groups.  Rather than use the Goggle Groups file feature, two new password protected upload directories have been established on the 802.16 web site at <http://memberupload.wirelessman.org>, specifically for the use of the Rapporteur groups.  A link to this page entitled "Link to File Upload Server” has also been put onto the TGm reflector.  Contributions to these upload directories must be numbered in the following form in order for the directories to accept them: C80216mDL_PHY-08_xyz.doc and C80216mDL_ctrl-08_xyz.docVery Important: Please note that name of the downlink control group has been changed from “DL_contrl” to “DL_ctrl”.

 

If you are involved in or interested in the work of these groups, I STRONGLY recommend that you read this revised document, so that you fully understand the process.  Any questions, send an e-mail to either myself, Roger or the Rapporteur Chairs.

 

Brian Kiernan

TGm Chair