Re: [STDS-802-16] 802.16 Project Planning Committee (PPC): Machine to Machine Study Conference CC#2 - New Timeslot: 7-9AM Pacific time April 15th - Confirmed

["Puthenkulam, Jose P" <jose.p.puthenkulam@INTEL.COM>]

Dear 802.16m Fans,

 

Here is the confirmation for the new timeslot for CC#2. It is 7-9AM Pacific time on April 15^th.

 

Bridge information is the same and is provided below:

 

Thursday, April 15, 2010, 07:00-9:00 AM US Pacific Time
916-356-2663, 8-356-2663, Bridge: 4, Passcode: 5088216
Live Meeting: https://webjoin.intel.com/?passcode=5088216

 

Hope this time works better now for most folks. Thanks to Rakesh for bringing this to my attention.

 

Please update your calendars.

 

Agenda for CC#2 will be Architecture & Requirements & Usage Model Completion

 

Thanks & best regards,

jose

 

From: Puthenkulam, Jose P
Sent: Tuesday, April 13, 2010 12:00 AM
To: STDS-802-16@LISTSERV.IEEE.ORG
Cc: 'HanGyu Cho'
Subject: RE: [STDS-802-16] 802.16 Project Planning Committee (PPC): Machine to Machine Study Conference CC#1 - Usage Models Updated + Agenda for CC#2 - New Timeslot Proposed: 7-9AM Pacific time April 15th

 

Dear 802.16 M2M fans,

 

The updated M2M Study Report Draft with Usage Models section consolidated with the input contributions has been posted to the PPC upload folder.

 

http://dot16.org/ul//upload/ppc_db/80216ppc-10_0002r1.doc

 

Thanks to HanGyu our technical editor for preparing these updates.

 

Also Agenda for CC#2 will be Architecture & Requirements & Usage Model Completion

 

There is also a request to move the CC#2 to a more Asia friendly time slot, because presently it will be 2-4AM in India and also not friendly times in East Asia.

 

So the plan is to move it to the same timeslot as CC#3 7-9AM Pacific time. So will have 2 timeslots each with the same time. Also I have move the date because of the late notice for 13^th and give people enough time to adjust.

 

I considering moving it to April 15^th 7-9AM Pacific time.

 

Please await my confirmation on this soon.

 

Thanks & best regards,

jose