Thread Links | Date Links | ||||
---|---|---|---|---|---|
Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
I have the same issue – no response Sam From: Erik Colban [mailto:ecolban@HUAWEI.COM] I had the same problems. Dear Ron As soon as I received this e-mail, I requested a subscription to STDS-802-16-M2M@LISTSERV.IEEE.ORG as instructions in <http://listserv.ieee.org/cgi-bin/wa?SUBED1=stds-802-16-m2m>. But, I have not received any response on the subscription and I found that my status is still "not subscribed". I also tried to subcribe to 16m mailing list and succeeded in subscribing without any problems. I was told that my colleagues in ETRI had the same problem. So, I'm wondoring whether or not all M2M members succeeded in subscribing to M2M specific mailing list. If many people have the same problem, then I think we have to use a normal 802.16 reflector for 16p ad hoc discussion until the problems are fixed. Can you clarify which mailing list ad hoc members have to use? Thanks. Best Regards, Jaesun Cha Senior Engineer Wireless Access Technology Research Team Mobile Telecommunication Research Laboratory Electronics and Telecommunications Research Institute TEL: +82-42-860-5587, FAX: +82-42-861-1966 -----------------------------------------------------
All, Please note that Roger Marks has set up a mailing list specific to M2M. Please use this for any M2M discussion Post to the list using this email address: No virus found in this message. -- CONFIDENTIAL: The information in this message is confidential and may be legally privileged. It is intended solely for the addressee(s). Access to this message by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, or distribution of the message, or any action or omission taken by you in reliance on it, is prohibited and may be unlawful. Please immediately contact the sender if you have received this message in error. Thank you. |