Re: [RPRWG] Single and dual transit buffer MACs

[Necdet Uzun <nuzun@xxxxxxxxx>]

John,

95% is the default value. It can be set to a smaller or larger value if
the network operator finds it necessary based on the target link
utilization on the ring (as you know single TB nodes can not go to 100%
link utilization without sacrificing the HP delay jitter).

Thanks.

Necdet

jalemon@xxxxxxxxx wrote:

> Necdet,
>
> While what you say may be true, it doesn't address the
> issue of having to rate limit to 95% when interoperating
> STB and DTB MACs.
>
> jl
begin:vcard 
n:Uzun;Necdet
tel;work:408 853 0461
x-mozilla-html:TRUE
url:www.cisco.com
version:2.1
email;internet:nuzun@xxxxxxxxx
adr;quoted-printable:;;Cisco Systems, Inc.=0D=0A170 W. Tasman Drive SJ-16-3=0D=0A;San Jose;CA;95134;
fn:Necdet Uzun
end:vcard