RE: stds-80220-requirements: Max Tolerable Delay Spread, 4.2.3
Neka,
You have provided a rationale for your proposal,
"The maximum tolerable delay spread should be specified so that it
can be
determined whether various vendor proposals can meet this
criteria."
which I don't believe to be a valid reason for establishing such a
requirement.
Can you provide any other reasoning for this proposal? I would expect the
rationale to explain why such a requirement would be essential for the
802.20 MBWA
to achieve it performance objectives.
Best regards,
Joanne Wilson
ArrayComm, Inc.
joanne@arraycomm.com
-----Original Message-----
From: owner-stds-80220-requirements@majordomo.ieee.org
[mailto:owner-stds-80220-requirements@majordomo.ieee.org]On Behalf Of
Neka Hicks
Sent: Tuesday, July 29, 2003 3:19 PM
To: Stds-80220-Requirements (E-mail)
Subject: stds-80220-requirements: Max Tolerable Delay Spread, 4.2.3
All,
Here's a contribution regarding max tolerable delay spread:
<<clearwire contribution 072803 - max tolerable delay spread.doc>>
Neka C. Hicks
Director of Network Engineering
Clearwire Technologies
469-737-7555 (office)
817-706-2548 (cell)