| Thread Links | Date Links | ||||
|---|---|---|---|---|---|
| Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
|
Reminder that the Working Group Recirculation Ballot is closing this Friday, November 12th. From: Beth Kochuparambil (edonnay) <00000b6647231c5d-dmarc-request@xxxxxxxx>
Dear Colleagues – This is your final reminder that the Working Group Recirculation Ballot is closing this Friday, November 12th. Given the direction from the group, we are hoping to move into SA Ballot, so please do your best to look for only MUST-CHANGE items for this ballot cycle. ~Beth From: Beth Kochuparambil (edonnay) Dear Task Force Participants, With this e-mail, I'd like to announce the start of the IEEE P802.3ck/D2.3 100 Gb/s, 200 Gb/s, and 400 Gb/s Electrical Interfaces Working Group 3rd recirculation ballot. Open date: Friday 29th October 2021 Close date: Friday 12th November 2021 23:59 AOE As stated in the attached announcement, the ballot group for this draft is the IEEE 802.3 voting membership as of Friday 19th March 2021. All comments received before the close of ballot will be considered, the one limitation however
is that if you are not a member of the balloting group, and therefore cannot cast a ballot, you cannot designate comments as TR or ER since you cannot cast a Disapprove ballot. Best regards, Beth Kochuparambil Chair, IEEE P802.3ck 100 Gb/s, 200 Gb/s, and 400 Gb/s Electrical Interfaces Task Force ----- Dear Colleagues, This is the announcement of the electronic IEEE 802.3 Working Group 3rd recirculation ballot on the amendment IEEE P802.3ck 100 Gb/s, 200 Gb/s, and 400 Gb/s Electrical Interfaces. Remember that voting, as well as attendance, is a requirement
to maintain your IEEE 802.3 member (voter) status <http://ieee802.org/3/rules/member.html#DOT3>. Instructions for accessing the draft, casting your ballot and submitting comments follow this announcement.
Please review the commenting instructions below to ensure you are using the most up to date tools. The ballot group for this draft is the IEEE 802.3 voting membership as of Friday 19th March 2021. Because this is a recirculation ballot, YOU ONLY NEED TO CAST A BALLOT IF YOU WISH TO CHANGE YOUR VOTE FROM THAT WHICH WAS RECORDED ON THE INITIAL BALLOT OR LAST RECIRCULATION. If you voted previously and your vote has not changed, the
last ballot cast will be carried over to this ballot and you do not need to cast a new ballot. BALLOT SCOPE: During this IEEE 802.3 Working Group 3rd recirculation ballot, the scope of the ballot is the substantive changes between IEEE P802.3ck/D2.2 and IEEE P802.3ck/D2.3 and the unsatisfied negative comments. CRITERIA FOR STANDARDS DEVELOPMENT: One of the responsibilities as a balloter is to ensure that draft is consistent with the criteria for standards development (CSD) responses which are available at <https://ieee802.org/3/ck/P802_3ck_CSD_06apr18.pdf>.
An Approve vote indicates your agreement that the draft is consistent with the CSD responses. BALLOT OPEN: Friday 29th October 2021 BALLOT CLOSE: Friday 12th November 2021 23:59 AOE The Project Authorization Request for this Amendment is available at <https://ieee802.org/3/ck/P802_3ck_PAR_14may18.pdf> and includes the following: TITLE: Standard for Ethernet Amendment: Physical Layer Specifications and Management Parameters for 100 Gb/s, 200 Gb/s, and 400 Gb/s Electrical Interfaces Based on 100 Gb/s Signaling SCOPE OF PROJECT: This project is to specify additions to and appropriate modifications of IEEE Std 802.3 to add Physical Layer specifications and Management Parameters for 100 Gb/s, 200 Gb/s, and 400 Gb/s electrical interfaces based on 100 Gb/s signaling. NEED FOR THE PROJECT: The continual growth of bandwidth demand has driven evolution of higher Ethernet speeds, most recently with 100Gb/s, 200 Gb/s and 400 Gb/s Ethernet. To meet this growth, ongoing advancement in serializer and deserializer circuit (SERDES)
technology to higher rates of operation enables the opportunity to develop higher density or lower cost electrical interfaces using 100 Gb/s signaling. Thank you for your participation in this ballot and careful review of the draft. David Law Chair, IEEE 802.3 Ethernet Working Group Phone: +44 1631 563729 Email: david_law@xxxxxxxx
Beth Kochuparambil Chair, IEEE P802.3ck 100 Gb/s, 200 Gb/s, and 400 Gb/s Electrical Interfaces Task Force Phone: +1 408 424 5517 Email: edonnay@xxxxxxxxx ---------------------------------------------------------------- INSTRUCTIONS FOR BALLOTING ON: IEEE P802.3ck draft D2.3 Instructions for accessing the ballot documents, casting your ballot and submitting comments follow. HOW TO ACCESS THE DRAFT The draft is posted for your review for balloting purposes only, and neither the draft nor access information should be copied or redistributed to others in violation of document copyrights. The IEEE P802.3ck 100 Gb/s, 200 Gb/s, and 400 Gb/s Electrical Interfaces draft D2.3 may be downloaded from: URL: <https://ieee802.org/3/ck/private/8023ck_D2p3.pdf> Username: <IEEE 802.3 or IEEE P802.3ck username> Password: <IEEE 802.3 or IEEE P802.3ck password> Please submit comments against the above draft. A comparison file between IEEE P802.3ck 100 Gb/s, 200 Gb/s, and 400 Gb/s Electrical Interfaces draft D2.2 and D2.3 is also provided to both focus and ease your review. Please DO NOT comment on this comparison document. This draft may
be downloaded from: <https://ieee802.org/3/ck/private/8023ck_D2p3_compare.pdf> Please DO NOT submit comments against the above document. Unsatisfied negative comments, and their dispositions may be downloaded from: <https://www.ieee802.org/3/ck/comments/draft2p2/8023ck_D2p2_final_unsatisfiedcomments_a.pdf> All comments, and their dispositions, from the 2nd recirculation ballot may be downloaded from: <https://www.ieee802.org/3/ck/comments/draft2p2/8023ck_D2p2_final_closedcomments.pdf> These documents are posted in Adobe "pdf" document format and can be downloaded and printed if desired. If you do not have Adobe Acrobat Reader, it is available for free downloading from: <http://www.adobe.com/prodindex/acrobat/readstep.html> HOW TO CAST YOUR BALLOT To assure your ballot is counted, please: 1) Send your ballot to:
stds-802-3-ballot@xxxxxxxx 2) Paste the following line into the subject field: IEEE P802.3ck 100 Gb/s, 200 Gb/s, and 400 Gb/s Electrical Interfaces D2.3 ballot This can be done with this link <mailto:stds-802-3-ballot@xxxxxxxx?subject=IEEE%20P802.3ck%20100
Gb/s,%20200%20Gb/s,%20and%20400%20Gb/s%20Electrical%20Interfaces%20D2.3%20ballot> 3) Paste into the message body and complete the ballot form below: -----CUT AND PASTE TEXT BELOW THIS LINE ONLY PLEASE-------- IEEE P802.3ck 100 Gb/s, 200 Gb/s, and 400 Gb/s Electrical Interfaces D2.3 ballot Your Name:___________________________ ___ APPROVE ALL WITHOUT COMMENT ___ APPROVE ALL WITH COMMENTS on SOME (All comments are non-binding) ___ DISAPPROVE (Some or all comments are binding; a voter must submit specific comments for remedy) ___ ABSTAIN, Lack of Expertise ___ ABSTAIN, Lack of Time -----------------------end ballot form-------------------- HOW TO SUBMIT COMMENTS Acceptable comment types: E = Editorial ER = Editorial Required (a binding comment that is part of a DISAPPROVE vote, therefore only appropriate for an IEEE 802.3 voting member) T = Technical TR = Technical Required (a binding comment that is part of a DISAPPROVE vote, therefore
only appropriate for an IEEE 802.3 voting member) 1. Prepare your comments in one of the following three ways. You are STRONGLY REQUESTED to use the spreadsheet. A comment entry tutorial is available at:
<http://ieee802.org/3/ballots/p802d3_comment_entry_tutorial_v1p0.pdf> a. Access the comment spreadsheet at the URL: <http://www.ieee802.org/3/WG_tools/spreadsheet/802d3_TFR_WGB_comments.xls> b. Access the comment tool at the URL: <http://www.ieee802.org/3/WG_tools/filemaker/Generic_Commenting_Tool_FM.zip> To use the tool, extract all components into a folder and do not move any component from that folder as this will cause the executable to not work correctly. The tool is: Comment_Tool_Generic_Solution.exe c. To submit comments in text (ASCII) form, please use the form below. This will make it possible for the editor to properly record and track all submissions. Make as many copies of the template as necessary and submit as an ASCII text
file or as part of your e-mail. PLEASE NOTE: The ASCII method involves a manual transcription, hence you are recommended to check your comments to ensure accurate transcription when the comment file is made available. Please use one of the comment tools above if possible. ------CUT AND PASTE TEXT BELOW THIS LINE ONLY PLEASE-------- CommentID: (Leave Blank) CommenterName: CommenterCompany: Clause: Subclause: Page: Line: CommentType: (E, ER, T, or TR) Comment: CommentEnd: SuggestedRemedy: RemedyEnd: --------------------end comment template------------------ 2. Send your comments to:
stds-802-3-ballot@xxxxxxxx and paste into the subject line: IEEE P802.3ck 100 Gb/s, 200 Gb/s, and 400 Gb/s Electrical Interfaces D2.3 comments This can be done with this link <mailto:stds-802-3-ballot@xxxxxxxx?subject=IEEE%20P802.3ck%20100
Gb/s,%20200%20Gb/s,%20and%20400%20Gb/s%20Electrical%20Interfaces%20D2.3%20comments> To unsubscribe from the STDS-802-3-100GEL list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-100GEL&A=1 To unsubscribe from the STDS-802-3-100GEL list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-100GEL&A=1 |