Thread Links | Date Links | ||||
---|---|---|---|---|---|
Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
Third thread From: Mike Dudek <mdudek@xxxxxxxxxxx>
Warning - External Email
When you say DUT/variable attenuator do you mean a cable or PCB traces. I’m assuming you want a frequency dependent loss.
I’m surprised you have BERT in the diagrams. I’m more used to a scope being used for measuring SNDR.
From: Richard Mellitz <Richard.Mellitz@xxxxxxxxxx>
External Email
Hi All, Here a set of lab measurement that would provide good data to back up for what we discussed in the ad-hoc. This could be done with simulation by I feel at this point measurement
would be lend a more practical understanding. Ideas? … Rich
Richard Mellitz,
Samtec Southeast Office: 803-908-4411 Mobile: 8038737343 </Adee> To unsubscribe from the STDS-802-3-100GEL list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-100GEL&A=1 |