Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [802.3_100GEL] Follow-up on SNDR/SNR_TX presentation from the January 12 interim teleconference

This is the experiment suggestion I send out on this tread.  I’m not sure the pdf will make it on the web server.

… Rich

 

From: Adee Ran (aran) <0000147b29386f6c-dmarc-request@xxxxxxxxxxxxxxxxx>
Sent: Friday, January 14, 2022 10:11 AM
To: STDS-802-3-100GEL@xxxxxxxxxxxxxxxxx
Subject: Re: [802.3_100GEL] Follow-up on SNDR/SNR_TX presentation from the January 12 interim teleconference

 

Third thread

 

From: Mike Dudek <mdudek@xxxxxxxxxxx>
Sent: Thursday, January 13, 2022 4:14 PM
To: Richard Mellitz <Richard.Mellitz@xxxxxxxxxx>; Adee Ran (aran) <aran@xxxxxxxxx>; Adam Healey (adam.healey@xxxxxxxxxxxx) <adam.healey@xxxxxxxxxxxx>; John Calvin <john.calvin@xxxxxxxxxxxx>; Varun Garg <varun_garg@xxxxxxxxxxxx>; ML Wu (吳茂霖) <ml.wu@xxxxxxxxxxxx>; Bill Kirkland <wkirkland@xxxxxxxxxxx>; 'Phil Sun' <phil.sun@xxxxxxxxxxxxx>; Liav Ben Artsi <liav@xxxxxxxxxxx>
Cc: Matt Brown <mbrown8023@xxxxxxxxx>
Subject: RE: [EXTERNAL][802.3ck] Thoughts about SNDR... looking for feedback

 

Warning - External Email

When you say DUT/variable attenuator do you mean a cable or PCB traces.   I’m assuming you want a frequency dependent loss.  

 

I’m surprised you have BERT in the diagrams.   I’m more used to a scope being used for measuring SNDR. 

 

From: Richard Mellitz <Richard.Mellitz@xxxxxxxxxx>
Sent: Thursday, January 13, 2022 12:41 PM
To: Adee Ran (aran) <aran@xxxxxxxxx>; Mike Dudek <mdudek@xxxxxxxxxxx>; Adam Healey (adam.healey@xxxxxxxxxxxx) <adam.healey@xxxxxxxxxxxx>; John Calvin <john.calvin@xxxxxxxxxxxx>; Varun Garg <varun_garg@xxxxxxxxxxxx>; ML Wu (吳茂霖) <ml.wu@xxxxxxxxxxxx>; Bill Kirkland <wkirkland@xxxxxxxxxxx>; 'Phil Sun' <phil.sun@xxxxxxxxxxxxx>; Liav Ben Artsi <liav@xxxxxxxxxxx>
Cc: Matt Brown <mbrown8023@xxxxxxxxx>
Subject: [EXT] RE: [EXTERNAL][802.3ck] Thoughts about SNDR... looking for feedback

 

External Email

Hi All,

Here a set of lab measurement that would provide good data to back up for what we discussed in the ad-hoc. This could be done with simulation by I feel at this point measurement would be lend a more practical understanding.

Ideas?

… Rich

 

 

Richard Mellitz,

Samtec Southeast

Office: 803-908-4411 Mobile: 8038737343

www.samtec.com

 

</Adee>

 

 

To unsubscribe from the STDS-802-3-100GEL list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-100GEL&A=1

To unsubscribe from the STDS-802-3-100GEL list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-100GEL&A=1

Attachment: SNDR_EXPERIMENTS.pdf
Description: Adobe PDF document