RE: [10GBT-Modeling] RE: [10GBT-Cabling] [10GBASE-T] a channel capacity estim...
RL polarity still appears wrong in this version.
Samir.
> All,
>
> Attached you will find my latest version of i3e.
>
> It allows the user to use either the ISO models or Solarflare
> measurements for everything except return loss.
>
> In addition, the parameter "solarilmodel" allows the user to use
> the ISO insertion loss(IL) model with Solarflare measurements.
>
> The EL-FEXT and NEXT curves have been scaled to meet the limit lines
> for frequencies up to 100 MHz. The EL-FEXT curves were shifted up
> 13.1, 13.3, 11.7, and 11.1dB for victim pairs 1,2,3, and 4.
> Similarly, the NEXT curves were scaled up by 4, 0.08, 2.1, and
> 1.9 dB.
>
> The level of cancellations remain the same as in Marvell's original
> code, except that alien next cancellation is a parameter controlled
> by "cancdB".
>
> The results are as follows:
>
> Cancellation 0 dB 10dB
> ---------------------------------------------------------------
> ISO only 4.92 7.85
> Solar(with ISO IL) 9.11 12.66
> Solar(with Solar IL) 10.55 14.68
>
> Carlos Aldana
--
Open WebMail Project (http://openwebmail.org)