Thread Links			Date Links
Thread Prev	Thread Next	Thread Index	Date Prev	Date Next	Date Index

Re: [10GBT] THP coefficient set clarification & robustness

To: STDS-802-3-10GBT@listserv.ieee.org
Subject: Re: [10GBT] THP coefficient set clarification & robustness
From: Glenn Golden <gdg@zplane.com>
Date: Mon, 10 Jan 2005 10:52:20 -0700
In-Reply-To: Message from "George Zimmerman" <gzimmerman@solarflare.com> of "Mon, 10 Jan 2005 09:44:34 PST." <D59797D4377CDE44B0C4A5A8C7675BA7B2EFDC@solar008.SolarFlarecom.com>
Reply-To: gdg@zplane.com
Sender: "IEEE P802.3an Reflector" <stds-802-3-10gbt@IEEE.ORG>

"George Zimmerman" writes:
> Glenn - those are only useful for magnitude information.  How did you
> scale the phase information?
>

Sorry, should have mentioned that.  Linear scaling is used for phase: Phase
angle proportional to the ratio of the scaled length to the 100m value.

Glenn

References:
- Re: [10GBT] THP coefficient set clarification & robustness
  - From: George Zimmerman <gzimmerman@SOLARFLARE.COM>

Prev by Date: Re: [10GBT] THP coefficient set clarification & robustness
Next by Date: Re: [10GBT] THP coefficient set clarification & robustness
Prev by thread: Re: [10GBT] THP coefficient set clarification & robustness
Next by thread: [10GBT] FW: [802.3] Interim meetings
Index(es):
- Date
- Thread