|
Dear all,
The list of introduced changes
(non-exhaustive) includes the following items:
- Modified user interface - all typical user input was grouped in a single
table
- The spreadsheet is locked by default (no password) providing access only
to user input fields
- All tables with less frequently observed/modified parameters were moved to
row 500
- Modified fibre attenuation curve selector - right now it is possible to
use the previously existing model ("standard" in cell B24) or G652 AB/CD type
of curves
- Added G652AB/CD fibre attenuation curves with min/max values to observe
changes on the power budget in the function of fibre attenuation (set B24 to
G652AB or G652CD and modify cell B25 to get min/max curves)
- Added curve type selector for PSC attenuation curve (cell B18) with 3
possible values i.e. min/max/average, as discussed in 3av_0611_hajduczenia_1.pdf
- Set-up the print area so that there is a table with parameters along with
the charts
- Added uniform colour coding to indicate correct/incorrect/input/output
cells
- Added Macro to allow the user to input Extinction Ratio and vary either
Tx_Pave_dBm or TxPave_OMA (cells B4 or B5) - please allow macros in this
document if You want to use this particular functionality
- Added 4 columns for upper and lower limits used in conditional formating
in User input and Calculated Parameters tables.
I would appreciate all constructive comments
on this issue.
Thank You and best wishes
|