[10GMMF] TP3 Definition Project Conference Call: Tuesday 9am PST, 12 Noon EST, 5pm UK

[Michael Lawton <mike_lawton@xxxxxxxxxxx>]

Hello Everyone,

This is an invite to all interested parties to join our first call to kick off the work on TP3 Definition.

The Dial-in details are as follows:-

International Direct Dial (650) 599-0374
Meeting ID:                     801803


Agenda For Meeting
==================

1. Gather list of attendees

2. Discuss Goals/Scope (Draft, for discussion:-)
        - Present a proposal for TP3 specification parameters and associated conformance testing during the September Meeting
        - Identify, explain, and propose recommendations on key design trade offs (i.e. simplicity of implementation vs complexity required for channel model)
        - Work with TP2 and channel groups on overall trade off choices
        - Q: Do we do any work to progress the link budget in this group??
        - ???

3. Agree Modus Operandi
        - Weekly Tuesday call?
        - smaller sub-groups meeting separatly?
        - Post meeting notes on 10GMMF reflector

4. If possible agree overall Testing Philosphy (reference http://grouper.ieee.org/groups/802/3/aq/public/jul04/aronson_1_0704.pdf)
        - Stressed (normative) vs simple (informative) test
        - Adaptation speed test (seperate or part of stressed test?)

5. Develope detailed work list (& interested parties) for more detailed analysis of individual tests:-

        The following points have been taken from Lew's presentation (link above):-

                - Normative Stressed Rx Sensitivity Test
                        o Is a 2 ray model sufficient as an ISI generator?
                        o What is the best choice for relative peak height and separation?
                        o Is a certain maximum bandwidth important?
                        o Define measurement for OMA
                        o Determine S/N requirements of compliance signal
                        o Define test procedures for calibrating conformance test signal

                - Dynamic Adaptation Test
                        o Determine rate of adaptation required
                        o Determine channel simulator and time varying component
                        o Define exact test method
                        o Choose appropriate allocation for Dynamic Adaptation Penalty

                - Informative Sensitivity Test
                        o Goals for test
                        o Use simple Gaussian ISI or 2 ray model for channel
                        o Detailed parameters of that channel emulator

Please let me know if you have any comments.

Best Regards

Mike

+44 1473 465200