Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [10GMMF] Towards receiver test responses



John,
 
I may have missed it, but did you show here what are the %tiles on Gen67YY w/r to the DFE cases and PIE-D?
 
Robert

Robert Lingle, Jr, Manager
Fiber Design and Transmission Simulation
OFS R&D, Atlanta, GA

-----Original Message-----
From: John.Ewen@JDSU.COM [mailto:John.Ewen@JDSU.COM]
Sent: Thursday, April 07, 2005 2:39 PM
To: STDS-802-3-10GMMF@LISTSERV.IEEE.ORG
Subject: Re: [10GMMF] Towards receiver test responses


The attached .xls file contains the candidate TP3 ISI parameters that were requested during the TP3 telecon on 5-Apr-05. The PIE-D targets were generally swept from ~3.5dB to ~5dB, although there will be some variation in the resulting PIE-D due to the nature of the search algorithm.


The results for the split-symmetric response deserve some comment. The first 11 entries in the worksheet are essentially identical. This occurs because split-symmetric responses, as we have defined them, do not exist for PIE-D < ~ 4dB. For PIE-D targets < 4dB, the search algorithm finds the best response possible consistent with the constraints resulting in the same ISI parameters for these cases.

Regards - John