RE: XAUI Compliance Channel Simulation Results
I guess the link is too long to pass in one line, so go to:
http://www.ieee802.org/3/ae/public/adhoc/serial_pmd/xaui_documents
and look for "XAUI Compliance Channel Simulation Results"
Sorry, Eyran.
-----Original Message-----
From: DAmbrosia, John F [mailto:john.dambrosia@xxxxxxxxxxxxxxxxxxx]
Sent: Thursday, February 08, 2001 3:19 PM
To: 'Eyran Lida'; 'anthony.sanders@xxxxxxxxxxxx'
Cc: 'Serial PMD reflector (E-mail)'
Subject: RE: XAUI Compliance Channel Simulation Results
when i hit this link, it says file does not exist.
-----Original Message-----
From: Eyran Lida [mailto:eyranl@xxxxxxxxxxxx]
Sent: Thursday, February 08, 2001 4:55 AM
To: 'anthony.sanders@xxxxxxxxxxxx'
Cc: 'Serial PMD reflector (E-mail)'
Subject: RE: XAUI Compliance Channel Simulation Results
Anthony,
These are
(http://www.ieee802.org/3/ae/public/adhoc/serial_pmd/xaui_documents/compchan
.pdf Thanks David Law) our compliance channel simulation results based on
Dawson's formula. We will be happy to do this again on some real measurments
(so please send us if you have some).
Eyran.
-----Original Message-----
From: Anthony Sanders [mailto:anthony.sanders@xxxxxxxxxxxx]
Sent: Monday, February 05, 2001 3:18 PM
To: Boaz Shahar
Cc: Serial PMD reflector (E-mail); Eyran Lida
Subject: Re: XAUI Jitter Protocol 17th January
Boaz,
all simulation results up until the March Plenary are relevant, the
sooner the better of course. It could be the we discover inconsistencies
meaning we would need to make some comments to the current D2.1
Thanks for the support,
Anthony.
Boaz Shahar wrote:
>
> Anthony,
> Unfortunately we did not simulate the channel yet. We can do it until the
> end of the next week, I think. Will it still be relevant then?
> Boaz
>
> > -----Original Message-----
> > From: Anthony Sanders [mailto:anthony.sanders@xxxxxxxxxxxx]
> > Sent: Wednesday, January 31, 2001 10:02 PM
> > To: Boaz Shahar
> > Cc: Serial PMD reflector (E-mail); Eyran Lida
> > Subject: Re: XAUI Jitter Protocol 17th January
> >
> >
> > Boaz,
> >
> > does Mysticom have any input wrt compliance channel results for the
> > meeting today? Would be very helpful.
> >
> > Thanks,
> >
> > Anthony.
> >