Jitter tolerance experiments on 2.5, 3.125 and 10 Gb/s
Hi all
I have made a PDF (ZIPed to 398 kB) document describing experimental Jitter
tolerance measurement on 2.5, 3.125 and 10 Gb/s CDRs. I don't know if this
will pass the reflector. (it didn't).
David Law has put in on the reflector.
THe links is:
http://grouper.ieee.org/groups/802/3/ae/public/adhoc/serial_pmd/jitter_docum
ents/jtolerance1.pdf
It also investigates the impact of different signal conditions and the
difference between ITU-T (1 dB optical receiver sensitivity penalty) and the
FC / 10 GE total jitter (TJ) specification.
The recently D2.1 changed TJ of the XAUI high frequency jitter specs to TJ
(incl SJ) of 0.7 UIpp may be difficult to fulfil for a PLL based CDR, even
under ideal signal conditions at that speed of 3.125 Gb/s.
Benny
--------------------------------------------
llllllll ii llllllll llllll
ll ll ll ll
ll llll ll ll llll llllllllll
ll ll ll ll ll ll ll
llllllll ll llllllll ll ll
GIGA, an Intel company
Benny Christensen, M.Sc.E.E, Ph.D.
Mileparken 22, DK-2740 Skovlunde, Denmark
Tel: +45 7010 1062, Fax: +45 7010 1063
e-mail: benny.christensen@intel.com, http://www.giga.dk
A comparison of ITU-T and FC-GE jitter methodology applied to jitter tolerance and eye opening measurements on high-speed CDRs.url