Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [802.3_B10GAUTO] AC coupling capacitors information



Haysam et al,  

The link segment is not AC-coupled. We can explicitly preclude AC-coupling in the link segment by adding a sentence for those concerned of 
the possibility. 

165.7 Link segment characteristics - 
Add sentence end of paragraph
AC-coupling shall not be implemented within 
the link segment (between TP1 and TP4).

The link segment IL limit should not be changed from 10MHz to 2MHz on the basis of baseline wander attributed to HPF corner frequency in https://www.ieee802.org/3/cy/public/nov21/feyh_3cy_01b_01_11_09_21.pdf.


Regards, Chris



-----Original Message-----
From: Haysam Kadry <hkadry@xxxxxxxx>
To: STDS-802-3-B10GAUTO@xxxxxxxxxxxxxxxxx
Sent: Tue, Jan 11, 2022 9:50 pm
Subject: [802.3_B10GAUTO] AC coupling capacitors information

Hello, 

The discussion in moving the IL limit from 10MHz to 2MHz in accordance to https://www.ieee802.org/3/cy/public/nov21/feyh_3cy_01b_01_11_09_21.pdf.  I am looking for some information 

1. AC couple capacitor value range and ESR characteristics.
2. PHY termination circuit values 

This will help put together a simulation profile for the front end circuit.  

Best regards, 

Haysam M. Kadry
Ford Motor Company

To unsubscribe from the STDS-802-3-B10GAUTO list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-B10GAUTO&A=1

To unsubscribe from the STDS-802-3-B10GAUTO list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-B10GAUTO&A=1