Hi Natalie,
The following revised proposed Remedy for P802.3d0pb comment #1 was developed with input from Scott and George. This would replace everything currently in the Remedy box. I hope it does the trick.
Delete definitions for -T1 and -V1 on P156, L20-21 and delete “where” on P156, L16 (comment #4 deletes the definition for "X+Y").
Insert the following as a new paragraph after Table 202-1 (P156, L47):
“The following shorthand nomenclature, without the full PHY name, is used to describe the MDI, link segment, test mode, and other specifications that are medium dependent:
-T1 represents a single shielded balanced pair of conductors (i.e., differential)
-V1 represents a single-ended coaxial cable (i.e., unbalanced)”
Grant Editorial license to insert text in the correlating locations in Clause 200 and Clause 201.
Grant Editorial license to search for “MultiG+100M/100M+MultiGBASE-T1/V1” in non-PHY references and work with the Champions to remove the text and make necessary Editorial adjustments (for example, in 202.1.2, replace, “Each PHY in a in a MultiG+100M/100M+MultiGBASE-T1 link is capable of operating…” with “Each PHY is capable of operating…”).
Grant Editorial license to search for “-T1/-V1” and work with the Champions to remove the text and make necessary Editorial adjustments (i.e., there should be no occurrences of “-T1/-V1” in the draft as it is not defined shorthand nomenclature).
Re-open comment #5 and mark it “AIP, accommodated by comment #1”.
Safe travels and I look forward to seeing you – Val
Valerie Maguire, BSEE
602-228-7943 mobile
To unsubscribe from the STDS-802-3-ISAAC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-ISAAC&A=1