At the comment resolution meeting Tuesday it wasn’t clear what resolution would satisfy comments #107 and #237.
Some options to consider (not intended to exclude others) and can be discussed at the next comment resolution meeting:
Option 1: Implement the suggested remedy for #237 and withdraw/reject #107.
Option 2: Delete definition of tdd_watchdog_status on P216L17 and remove tdd_watchdog_status from Figure 202-28. This solution takes the approach that tdd_watchdog_status is a subset of conditions that would be detected earlier by (loc_rcvr_status
= NOT_OK + hi_rfer)
Option 3:
- Delete definition of tdd_watchdog_status on P216L17
- At P216L53 insert definition of tdd_watchdog_timer: A timer used to determine that the TDD signal has not been detected within the last 10 TDD cycles. The timer shall expire 960 us
+/- 50 us after being started.
- Make the changes to Figure 202-28 shown in the attachment
Best regards,
Scott
---
Scott Muma
Senior Technical Staff Architect
Microchip Technology, Inc.
Email: scott.muma@xxxxxxxxxxxxx
To unsubscribe from the STDS-802-3-ISAAC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-ISAAC&A=1