RE: [10GBASE-CX4] S-param characterization of the cable
Gary,
This is a complete measurement, the format is good, I can convert single
ended data to differential data. Do you have the rest of the measurements.
This is for the test fixture only.
Thanks!
howard liu
-----Original Message-----
From: Oleynick, Gary [mailto:GOleynick@fciconnect.com]
Sent: Tuesday, June 17, 2003 6:16 PM
To: Liu, Howard; Oleynick, Gary; 10GBASE-CX4 (E-mail)
Subject: RE: [10GBASE-CX4] S-param characterization of the cable
Howard,
Does this help?
Gary
-----Original Message-----
From: Liu, Howard [mailto:howard.liu@ti.com]
Sent: Tuesday, June 17, 2003 4:08 PM
To: 'Oleynick, Gary'; 10GBASE-CX4 (E-mail)
Subject: RE: [10GBASE-CX4] S-param characterization of the cable
Gary,
Thanks again, I looked into the files, looks like that it only has the
amplitude measurements in dBs, I need its phase measurements too if you have
them.
Thanks!
howard
-----Original Message-----
From: Oleynick, Gary [mailto:GOleynick@fciconnect.com]
Sent: Tuesday, June 17, 2003 5:02 PM
To: Liu, Howard; 'DOVE,DANIEL J (HP-Roseville,ex1)'; 10GBASE-CX4
(E-mail)
Cc: Oleynick, Gary
Subject: RE: [10GBASE-CX4] S-param characterization of the cable
Howard,
Attached is FCI's S-parameter data on the 10 and 15 meter cable assembly
lengths.
Regards,
Gary
-----Original Message-----
From: Liu, Howard [mailto:howard.liu@ti.com]
Sent: Tuesday, June 17, 2003 2:31 PM
To: 'DOVE,DANIEL J (HP-Roseville,ex1)'; 10GBASE-CX4 (E-mail)
Subject: [10GBASE-CX4] S-param characterization of the cable
Hi,
Do we have an exist measurement of the channel (cable) from TP1 to TP4 with
FEXT and NEXT included? It can be in any format.
Thanks!
Howard Liu
Texas Intruments
214 480 7678