RE: [10GBASE-CX4] S-param characterization of the cable
Hello,
For those who are observing this conversation, the data Gary sent
exceeded the 100K maximum size limit for the reflector. As a result,
only those directly addressed received the file.
Regards,
Dan Dove
Chair, 802.3ak
> -----Original Message-----
> From: Liu, Howard [mailto:howard.liu@ti.com]
> Sent: Tuesday, June 17, 2003 4:26 PM
> To: 'Oleynick, Gary'; 10GBASE-CX4 (E-mail)
> Subject: RE: [10GBASE-CX4] S-param characterization of the cable
>
>
>
> Gary,
> This is a complete measurement, the format is good, I can
> convert single
> ended data to differential data. Do you have the rest of the
> measurements.
> This is for the test fixture only.
>
> Thanks!
>
> howard liu
>
>
> -----Original Message-----
> From: Oleynick, Gary [mailto:GOleynick@fciconnect.com]
> Sent: Tuesday, June 17, 2003 6:16 PM
> To: Liu, Howard; Oleynick, Gary; 10GBASE-CX4 (E-mail)
> Subject: RE: [10GBASE-CX4] S-param characterization of the cable
>
>
> Howard,
>
> Does this help?
>
> Gary
>
>
>
> -----Original Message-----
> From: Liu, Howard [mailto:howard.liu@ti.com]
> Sent: Tuesday, June 17, 2003 4:08 PM
> To: 'Oleynick, Gary'; 10GBASE-CX4 (E-mail)
> Subject: RE: [10GBASE-CX4] S-param characterization of the cable
>
>
> Gary,
> Thanks again, I looked into the files, looks like that it only has the
> amplitude measurements in dBs, I need its phase measurements
> too if you have
> them.
>
> Thanks!
>
> howard
>
>
> -----Original Message-----
> From: Oleynick, Gary [mailto:GOleynick@fciconnect.com]
> Sent: Tuesday, June 17, 2003 5:02 PM
> To: Liu, Howard; 'DOVE,DANIEL J (HP-Roseville,ex1)'; 10GBASE-CX4
> (E-mail)
> Cc: Oleynick, Gary
> Subject: RE: [10GBASE-CX4] S-param characterization of the cable
>
>
> Howard,
>
> Attached is FCI's S-parameter data on the 10 and 15 meter
> cable assembly
> lengths.
>
> Regards,
>
> Gary
>
>
>
> -----Original Message-----
> From: Liu, Howard [mailto:howard.liu@ti.com]
> Sent: Tuesday, June 17, 2003 2:31 PM
> To: 'DOVE,DANIEL J (HP-Roseville,ex1)'; 10GBASE-CX4 (E-mail)
> Subject: [10GBASE-CX4] S-param characterization of the cable
>
>
>
>
> Hi,
> Do we have an exist measurement of the channel (cable) from
> TP1 to TP4 with
> FEXT and NEXT included? It can be in any format.
>
> Thanks!
>
>
> Howard Liu
>
> Texas Intruments
> 214 480 7678
>