Re: [BP] channels per phone conference

["Sawyer, Shannon" <shannon.sawyer@xxxxxxxxx>]

Rich,
Not sure where you see the 6dB of loss. Ports 1,2 are the thru, 3 is the
aggressor input, and 4 was terminated to 50ohm on the PNA. I've attached
a plot of the krytar_90554.s4p showing insertion loss at ~0.8dB out past
5GHz and directivity of ~10dB. 
-Shannon 

-----Original Message-----
From: Mellitz, Richard [mailto:richard.mellitz@INTEL.COM] 
Sent: Friday, January 20, 2006 7:37 AM
To: STDS-802-3-BLADE@listserv.ieee.org
Subject: Re: [BP] channels per phone conference

Hi Charles,
So this coupler has 6dB loss. I suspect the EIT channel + coupler should
approach AF max limit.
... Rich 

-----Original Message-----
From: Charles Moore [mailto:charles.moore@avagotech.com] 
Sent: Thursday, January 19, 2006 4:01 PM
To: STDS-802-3-BLADE@listserv.ieee.org
Subject: [BP] channels per phone conference

Here is the interference tolerance test channel and two couplers per the
phone conference

                        charles

-- 
|--------------------------------------------------------------------|
|       Charles Moore 
|       Avago Technologies
|       Image Solutions Division
|       charles.moore@avagotech.com
|       (970) 288-4561
|--------------------------------------------------------------------|

krytar_90554_s_param_plot.png