Thread Links | Date Links | ||||
---|---|---|---|---|---|
Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
Please find attached my homework for Cl 45 PCS registers. Best Regards Duane From: Duane Remein I’m just double checking to make sure everone is happy with the result. Table 45-177 is speed select while 180 is PCS type selection. Seems to me they’re a bit redundant too but better to ask than to do it again and again. Best Regards Duane From: Marek Hajduczenia [mailto:mxhajduczenia@xxxxxxxxx]
… and what would be the reason for duplication (just asking, not immediately obvious) …
Thanks Marek From: Duane Remein <Duane.Remein@xxxxxxxxxx>
Does anyone think we need to duplicate the speed settings in Table 45-177 that we talked about for PCS type settings in Table 45-180 (i.e., add 10/-, 25/0, long with 25/10 and 25/25 already proposed)? Best Regards, Duane FutureWei Technologies Inc. Director, Access R&D 919 418 4741 Raleigh, NC To unsubscribe from the STDS-802-3-NGEPON list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-NGEPON&A=1 To unsubscribe from the STDS-802-3-NGEPON list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-NGEPON&A=1 |
Attachment:
remein_3ca_2a_0119.pdf
Description: remein_3ca_2a_0119.pdf
Attachment:
remein_3ca_2a_0119 Clause 45 PCS.docx
Description: remein_3ca_2a_0119 Clause 45 PCS.docx