[802.3_NGAUTO] FW: [STDS-802-3] Invitation to participate in Standards Association Ballot of IEEE P802.3ch
-----Original Message-----
From: Law, David <dlaw@xxxxxxx>
Sent: Saturday, August 24, 2019 4:01 AM
To: STDS-802-3@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-3] Invitation to participate in Standards Association
Ballot of IEEE P802.3ch
Dear colleagues,
Draft standards within the IEEE 802.3 Ethernet Working Group pass through
two balloting cycles, first through IEEE 802.3 Working Group Ballot, then
through Standards Association Ballot. If you wish to take part in the
Standards Association Ballot of the IEEE P802.3ch draft please follow the
instructions found below. Please note that you have to join the ballot group
by 21-September-2019, 23:59 Eastern Time.
If you have any questions, please contact me.
Best regards,
David Law
Chair, IEEE 802.3 Ethernet Working Group
ENROLMENT INSTRUCTIONS
----------------------
To participate, you must have access to myProject through an IEEE Web
Account <http://www.ieee.org/about/help/my_account/web_account.html>. This
is the same IEEE Web Account you would use to access the IEEE attendance
tool.
If you are an IEEE-SA member:
Follow this process:
1. Log onto myProject; click the link for myBallot
<https://development.standards.ieee.org/my-site/home>.
2. Click the link for "Show/Join Open Ballot Invitations"
<https://development.standards.ieee.org/my-site/open-ballot-invitations>.
3. Scroll down until you find IEEE P802.3ch; then scroll over to the right
margin and click "join" under the "Actions" column. If you cannot see IEEE
P802.3ch please check the 'Show All Open Ballot Invitations' box.
4. Enter or select an affiliation from the drop down menu (appearing as you
key in your affiliation in the Organization window), select your
classification category, and click "OK" at the bottom of the screen. You
will receive an on-screen confirmation that you successfully joined the
group.
If you are not an IEEE SA Member:
You can either enroll in a single ballot by paying a per ballot fee or you
can join the IEEE SA by choosing an option link below. Joining the IEEE SA
entitles you to participate in as many Standards Association ballots as you
like for the year.
OPTION 1 - I am already an IEEE Member and I want to add Standards
Association Membership. Go to:
<http://www.ieee.org/membership_services/index.html>
OPTION 2 - I am not an IEEE Member but would like to enroll in both IEEE and
IEEE Standards Association. Go to:
<http://www.ieee.org/membership_services/membership/join/index.html>.
OPTION 3 - I am not interested in becoming an IEEE Member, however I would
like to enroll as a Standards Association Member only. Go to:
<http://standards.ieee.org/sa-mem/join.html>
If you are interested in paying a per ballot fee please contact
<David_Law@xxxxxxxx>.
OBLIGATIONS AND RESPONSIBILITIES OF BALLOTERS
---------------------------------------------
Once the document is ready to be balloted, you will receive notification via
email. You will typically have 30 days to review the document and return the
ballot with your vote. By agreeing to participate in this ballot you have an
*obligation* to respond. Failure to return a completed ballot may disqualify
you from participating in future ballots.
________________________________________________________________________
To unsubscribe from the STDS-802-3 list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3&A=1
________________________________________________________________________
To unsubscribe from the STDS-802-3-NGAUTO list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-NGAUTO&A=1