Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [802.3_100G-OPTX] P802.3cu adjourned



Hi Chris,
when you say: 
'.... including CD tolerance, and not require exotic techniques like PAM4 eye bottom compression proposed by Brian'... I remind you that bottom compression is nothing more than NRZ crossing points adjustment that most of transceiver's companies did in the past to be have some more dispersion robustness (TDP) against standard requirements.

We measured several times X2-Xenpak 10G NRZ transmitter with crossing point deviating from 50% (mainly on 10G-ZR, but lot of cases on 10GBASE-ER too).
In my opinion this optimization was same (or even more) dangerous than on PAM4 if you like, since we had to deal with average RX slicer thresholds and BER requirement of < 1E-12 (no FEC).
We all know history about.

Regards
Marco

-----Original Message-----
From: Chris Cole <chris.cole@xxxxxxxxxxx> 
Sent: martes, 16 de julio de 2019 12:00
To: STDS-802-3-100G-OPTX@xxxxxxxxxxxxxxxxx
Subject: Re: [802.3_100G-OPTX] P802.3cu adjourned

Dear 802.3cu Task Force Participants,

As discussed during yesterday's meeting, a path forward to consider is to reduce the 400G LR4 10km reach objective. 

There are a number of observations about 400G LR4 that are helpful to list:
	- Long term, there is a need for a longer reach, higher loss budget PMD in addition to 400G FR4
	- Volume is strongly driven by cost
	- CWDM grid has several low cost characteristics including no TEC, commonality with FR4, and simpler WDM filters and set-up
	- WDM grid is not the only determinant of cost
	- Cost is primarily driven by manufacturing margin 
	- Based on TF contributions, meeting specs. over range of 10km SMF CD is feasible but not with a lot of margin

What we learned in 802.3ba, when considering changing the 100G LR4 objective was:
	- Above 2km, the reach distribution is continuous and decreasing as a function of reach  
	- There are many applications with up to 2km reach and ~ 10km loss budget, for example 6.7dB. 

There is nothing magical about 10km. Datacenters are not sited based on IEEE reach objectives. I was asked by the chair to bring in a contribution discussing this in detail. To speed up the process, I got into my handy time machine, and made a contribution to the Salt Lake City meeting. Since this shifted us to an alternate time continuum, this contribution is now on the TF web site:

http://www.ieee802.org/3/cu/public/May19/cole_3cu_02c_0519.pdf

The summary observation is that end users are not going to pay a premium to support 10km worst case CD. If we want a truly low cost PMD, it should have comfortable margin all specs, including CD tolerance, and not require exotic techniques like PAM4 eye bottom compression proposed by Brian. It is very unlikely that any new data brought into the TF will show that 10km CD can be met with a lot of margin. 

My proposal is that we focus on defining a new, lower reach objective for 400G LR4, for example 8km, with 6.3dB (or even better 6.5 or 6.7dB) loss budget. 

I reviewed the Scope of the project with Mark Nowell, and reducing 10km is entirely within scope. 

5.2.b. Scope of the project: This project is to specify additions to and appropriate modifications of IEEE Std 802.3 to add PHY specifications and Management Parameters for 100 Gb/s and 400 Gb/s Ethernet optical interfaces for reaches up to 10 km based on 100 Gb/s per wavelength optical signaling.

Thank you

Chris

-----Original Message-----
From: Mark Nowell (mnowell) <00000b59be7040a9-dmarc-request@xxxxxxxx> 
Sent: Monday, July 15, 2019 9:15 AM
To: STDS-802-3-100G-OPTX@xxxxxxxxxxxxxxxxx
Subject: [802.3_100G-OPTX] P802.3cu adjourned

Dear Colleagues,

We’ve completed our work today and as announced in the room, we will not be meeting tomorrow. 

Regards,
Mark 

________________________________________________________________________
To unsubscribe from the STDS-802-3-100G-OPTX list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-100G-OPTX&A=1

________________________________________________________________________
To unsubscribe from the STDS-802-3-100G-OPTX list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-100G-OPTX&A=1

________________________________________________________________________
To unsubscribe from the STDS-802-3-100G-OPTX list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-100G-OPTX&A=1