Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [802.3_B400G_ELEC] [802.3dj] Development (pre-release) Version '4.7beta3' of COM code posted to COM ad hoc website

What is the difference between 4p6_1 and 4p6_4 minus the print out and Q.
Sent from my iPhone

>

Richard Mellitz, Signal Integrity (SI) Engineer

Samtec Southeast

Office: 803-908-4411

www.samtec.com

On Oct 30, 2024, at 12:17 PM, Hossein Shakiba <000029b7cabe11ea-dmarc-request@xxxxxxxxxxxxxxxxx> wrote: >
> Caution: This email originated from outside the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe. >
>
> Hi Kent,
>
> I tried the pre-released COM version 4.7beta3, announced in your following email and noticed that it does not include commit request 4p6_4. > Commit request 4p6_4 is about MLSE sequence truncation feature as described in shakiba_3dj_COM_01_241001.pdf. >
> Regards,
> Hossein
>
> -----Original Message-----
> From: Kent Lusted2 [mailto:kentlusted@xxxxxxxx]
> Sent: October 29, 2024 12:34 PM
> To: STDS-802-3-B400G-ELEC@xxxxxxxxxxxxxxxxx
> Subject: [802.3_B400G_ELEC] [802.3dj] Development (pre-release) Version '4.7beta3' of COM code posted to COM ad hoc website >
> Dear Colleagues,
>
> A development (pre-release) version 4.7beta3 of COM code was posted to the COM ad hoc website. See: > https://www.ieee802.org/3/dj/public/adhoc/COM/index.html (at the bottom of the page)
>
> This is a development (Pre-release) version for commit requests 4p6_1, 4p6_2, 4p6_3, 4p6_4, and 4p6_6 (NOT 4p6_5). Take caution when using this version. >
> This version is intended to become the published release as COM 4.7.
>
> Please review and make use of the electrical email reflector for discussion on this version.
>
>
> Regards,
> -Kent
>
>
> COM Ad hoc Chair, IEEE P802.3dj Task Force
>
>
> ________________________________________________________________________
> To unsubscribe from the STDS-802-3-B400G-ELEC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-B400G-ELEC&A=1 >
> ________________________________________________________________________
> To unsubscribe from the STDS-802-3-B400G-ELEC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-B400G-ELEC&A=1

To unsubscribe from the STDS-802-3-B400G-ELEC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-B400G-ELEC&A=1