Re: [HSSG] Regarding presentation "Implementation Considerations" by Roger Merel
The tone of the fibers.org article misleadingly suggests that the implementation of VCSEL arrays is "still at rather experimental stage." Suffice it to say that there are well over 100,000 12-channel parallel VCSEL-array link products operating in the field at present. Significant volumes began several years ago and keep rising. Manufacturers and users of these parallel optical interconnections are represented at 802.3 and the present HSSG. There is no need to discuss the technological details of monitoring (the subject of the fibers.org article) here; it is handled by various means. The parallel optical interconnect products have undergone rigorous qualification by customers with the highest standards of quality and reliability. VCSEL-array based parallel links are real, and this email is surely traveling through some of them.
The present links typically operate at a lane rate (channel rate) of 2.7-3.3Gbps. Customer-driven initiatives are already underway to increase the lane rate to 10Gbps. IBM (with Picolight) demonstrated a 12x10Gbps link operating over 300m of MMF at OFC 2003. It used "SNAP-12" modules, i.e. the same modules used today. Since then, 10Gbps VCSEL technology has matured significantly, driven by 10GBASE-SR sales.
Parallel optical links using VCSEL arrays, detector arrays, and MM parallel fibers are well on the way to showing "technically feasible" at speeds up to 120Gbps.
Jack
-----Original Message-----
From: Hajduczenia, Marek [mailto:marek.hajduczenia@xxxxxxxxxxx]
Sent: Tuesday, September 26, 2006 2:36 AM
To: STDS-802-3-HSSG@xxxxxxxxxxxxxxxxx
Subject: [HSSG] Regarding presentation "Implementation Considerations" by Roger Merel
Dear all,
If I recall it correctly, Roger expressed his concerns for the wavelength selection plan on slide number 8 of his presentation and pointed out that most likely the VCSEL arrays with 10 or more integrated sources can be technologically challenging. I would only like to point out that perhaps we should investigate his proposal to use integrated VCSEL arrays operating at 10+ Gbit/s -> here is why: http://fibers.org/articles/news/8/8/10. The arrays seems to be still at rather experimental stage though this is not the first piece of evidence that such devices can be achieved and may be a much cheaper solution than standard WDM systems ...
Looking forward to receiving any feedback ...
Best wishes
Marek Hajduczenia
(COM RD1)
SIEMENS SA - IC
Rua Irmãos Siemens, 1
Ed. 1, Piso 1
Alfragide
2720-093 Amadora
Portugal
* Marek.Hajduczenia@xxxxxxxxxxx
*+351.21.416.7472 *+351.21.424.2082
-----Original Message-----
From: Andy Moorwood [mailto:amoorwood@xxxxxxxxxxxxxxxxxxx]
Sent: segunda-feira, 25 de Setembro de 2006 18:36
To: STDS-802-3-HSSG@xxxxxxxxxxxxxxxxx
Subject: [HSSG] Reach Ad Hoc, call for participation and conference call announce ment
Dear HSSG Members,
thank you to those who have already replied with their intent to join this
activity, let me echo John's request for participation. I want to schedule
a conference call for Thursday October 5th at 11 am to 12:30 Pacific with
the following objectives:
1. Identify what media and reach information is already available to the
group for the nominated applications: "HPCC, Data Center, Metro, others"
2. Identify what media reach questions are of particular interest to the
group. For example, the 10 gigabit LR specification has a link budget
capable of supporting a reach of 10km in many installations. Are end users
actually using this budget? considerably less ? or they could use more ?
3. Define a schedule for future conference calls
To facilitate data sharing/viewing at the meeting we need to use some kind
of collaborative environment in addition to voice conferencing. Extreme
uses "Conference Place" by Intercall and I will host this kick off meeting
(If other members care to donate resources for future meetings this would be
appreciated). Live data sharing does however impose some restrictions in
that a member needs to be invited to the meeting place.
Consequently I need a minimum of 24 hours notice prior to the meeting if a
member intends to participate.
If a member wants to present at the meeting I need a minimum of 48 hours
notice and the slides (PDF or PPT) format
Any requests not meeting these timelines will be supported on a best efforts
basis. If it is possible to support audio only participation on a "drop in
basis" I will forward this to the reflector just prior to the meeting.
Thanks for your support !
Andy