| Thread Links | Date Links | ||||
|---|---|---|---|---|---|
| Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
Dear colleagues, This is the second friendly reminder about the ongoing D1.2 ballot for P802.3.1b project Regards Marek Hajduczenia Chair, IEEE P802.3.1 (IEEE 802.3.1b) Ethernet SMIv2 Data Model Definitions (revision) Task Force From: Marek Hajduczenia <mxhajduczenia@xxxxxxxxx> Dear colleagues, The Working Group recirculation ballot on draft D1.2 of P802.3.1b project is now open. Please see the announcement details below. Regards Marek Hajduczenia Chair, IEEE P802.3.1 (IEEE 802.3.1b) Ethernet SMIv2 Data Model Definitions (revision) Task Force -----Original Message----- Dear Colleagues, This is the announcement of the electronic IEEE 802.3 Working Group 2nd recirculation ballot of IEEE P802.3.1 (IEEE 802.3.1b) Ethernet SMIv2 Data Model Definitions (revision). Remember that voting, as well as attendance, is a requirement to maintain your IEEE 802.3 member (voter) status <http://ieee802.org/3/rules/member.html#DOT3>. Instructions for accessing the draft, casting your ballot, and submitting comments follow this announcement. Please review the commenting instructions below to ensure you are using the most up to date tools. The ballot group for this draft is the IEEE 802.3 voting membership as of Monday 20th November 2023. Because this is a recirculation ballot, YOU ONLY NEED TO CAST A BALLOT IF YOU WISH TO CHANGE YOUR VOTE FROM THAT WHICH WAS RECORDED ON THE INITIAL BALLOT OR LAST RECIRCULATION. If you voted previously and your vote has not changed, the last ballot cast will be carried over to this ballot and you do not need to cast a new ballot. BALLOT SCOPE: During this IEEE 802.3 Working Group 2nd recirculation ballot, the scope of the ballot is the substantive changes between IEEE P802.3.1 (IEEE 802.3.1b)/D1.1 and IEEE P802.3.1 (IEEE 802.3.1b)/D1.2. There are no unsatisfied negative comments. BALLOT OPEN: Tuesday 2nd April 2024 BALLOT CLOSE: Wednesday 17th April 2024 23:59 AOE The Project Authorization Request for this revision is available at <https://ieee802.org/3/1/b/P802d3d1_PAR.pdf> and includes the following: TITLE: Standard for Ethernet Structure of Management Information version 2 (SMIv2) Data Model Definitions SCOPE OF PROJECT: This standard defines Structure of Management Information version 2 (SMIv2) Management Information Base (MIB) module specifications for IEEE Std 802.3 Ethernet and associated managed object branch and leaf assignments used in the variable descriptors in IEEE Std 802.3 Variable Request operations, administration, and maintenance protocol data unit (OAMPDU). NEED FOR THE PROJECT: This revision is to address accumulated maintenance changes as well as appropriate updates to the IEEE Std 802.3.1 Structure of Management Information version 2 (SMIv2) MIB modules to support IEEE Std 802.3 amendments published since IEEE Std 802.3.1 was last revised in 2013. Thank you for your participation in this ballot and careful review of the draft. David Law Chair, IEEE 802.3 Ethernet Working Group Phone: +44 1631 563729 Email: david_law@xxxxxxxx Marek Hajduczenia Chair, IEEE P802.3.1 (IEEE 802.3.1b) Ethernet SMIv2 Data Model Definitions (revision) Task Force Phone: +1 720 536 1366 Email: marek.hajduczenia@xxxxxxxxxxx ---------------------------------------------------------------- INSTRUCTIONS FOR BALLOTING ON: IEEE P802.3.1 (IEEE 802.3.1b) draft D1.2 Instructions for accessing the ballot documents, casting your ballot and submitting comments follow. HOW TO ACCESS THE DRAFT The draft is posted for your review for balloting purposes only, and neither the draft nor access information should be copied or redistributed to others in violation of document copyrights. The IEEE P802.3.1 (IEEE 802.3.1b) Ethernet SMIv2 Data Model Definitions (revision) draft D1.2 may be downloaded from: URL: <https://www.ieee802.org/3/1/b/private/802.3.1b.D1.2.pdf> Please submit comments against the above draft. A comparison file between IEEE P802.3.1 (IEEE 802.3.1b) Ethernet SMIv2 Data Model Definitions (revision) draft D1.1 and D1.2 is also provided to both focus and ease your review. Please DO NOT comment on this comparison document. This draft may be downloaded from: <https://www.ieee802.org/3/1/b/private/802.3.1b.D1.2.CMP.pdf> In addition, machine readable SMIv2 modules may be downloaded from: <https://www.ieee802.org/3/1/b/private/802.3.1b.D1.2.zip> A comparison between IEEE P802.3.1 (IEEE 802.3.1b) Ethernet SMIv2 Data Model Definitions (revision) draft D1.1 and D1.2 machine readable SMIv2 modules may be downloaded from: <https://www.ieee802.org/3/1/b/private/802.3.1b.D1.2.MIB.CMP.pdf> Please DO NOT submit comments against any of the above three document. All comments, and their dispositions, from the 1st recirculation ballot may be downloaded from: <https://www.ieee802.org/3/1/b/comments/D1.1/802d3d1b_D1_1_approved.pdf> These documents are posted in Adobe "pdf" document format and can be downloaded and printed if desired. If you do not have Adobe Acrobat Reader, it is available for free downloading from: <http://www.adobe.com/prodindex/acrobat/readstep.html> HOW TO CAST YOUR BALLOT To assure your ballot is counted, please: 1) Send your ballot to: stds-802-3-ballot@xxxxxxxx 2) Paste the following line into the subject field: IEEE P802.3.1 (IEEE 802.3.1b) Ethernet SMIv2 Data Model Definitions (revision) D1.2 ballot This can be done with this link <mailto:stds-802-3-ballot@xxxxxxxx?subject=IEEE%20P802.3.1%20(IEEE%20802.3.1b)%20Ethernet%20SMIv2%20MIB%20(revision)%20D1.2%20ballot> 3) Paste into the message body and complete the ballot form below: -----CUT AND PASTE TEXT BELOW THIS LINE ONLY PLEASE-------- IEEE P802.3.1 (IEEE 802.3.1b) Ethernet SMIv2 Data Model Definitions (revision) D1.2 ballot Your Name:___________________________ ___ APPROVE ALL WITHOUT COMMENT ___ APPROVE ALL WITH COMMENTS on SOME (All comments are non-binding) ___ DISAPPROVE (Some or all comments are binding; a voter must submit specific comments for remedy) ___ ABSTAIN, Lack of Expertise ___ ABSTAIN, Lack of Time -----------------------end ballot form-------------------- HOW TO SUBMIT COMMENTS Acceptable comment types: E = Editorial ER = Editorial Required (a binding comment that is part of a DISAPPROVE vote, therefore only appropriate for an IEEE 802.3 voting member) T = Technical TR = Technical Required (a binding comment that is part of a DISAPPROVE vote, therefore only appropriate for an IEEE 802.3 voting member) 1. Prepare your comments in one of the following two ways. You are STRONGLY REQUESTED to use the spreadsheet. A comment entry tutorial is available at: <http://ieee802.org/3/ballots/p802d3_comment_entry_tutorial.pdf> a. Access the comment spreadsheet at the URL: <http://www.ieee802.org/3/WG_tools/spreadsheet/802d3_TFR_WGB_comments.xls> b. To submit comments in text (ASCII) form, please use the form below. This will make it possible for the editor to properly record and track all submissions. Make as many copies of the template as necessary and submit as an ASCII text file or as part of your e-mail. PLEASE NOTE: The ASCII method involves a manual transcription; hence you are recommended to check your comments to ensure accurate transcription when the comment file is made available. Please use one of the comment tools above if possible. ------CUT AND PASTE TEXT BELOW THIS LINE ONLY PLEASE-------- CommentID: (Leave Blank) CommenterName: CommenterCompany: Clause: Subclause: Page: Line: CommentType: (E, ER, T, or TR) Comment: CommentEnd: SuggestedRemedy: RemedyEnd: --------------------end comment template------------------ 2. Send your comments to: stds-802-3-ballot@xxxxxxxx and paste into the subject line: IEEE P802.3.1 (IEEE 802.3.1b) Ethernet SMIv2 Data Model Definitions (revision) D1.2 comments This can be done with this link <mailto:stds-802-3-ballot@xxxxxxxx?subject=IEEE%20P802.3.1%20(IEEE%20802.3.1b)%20Ethernet%20SMIv2%20MIB%20(revision)%20D1.2%20comments> ________________________________________________________________________ To unsubscribe from the STDS-802-3 list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3&A=1 To unsubscribe from the STDS-802-YANG list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-YANG&A=1 |