Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

RE: IEEE P802.3.2 (IEEE 802.3.2a)/D1.2 Ethernet YANG Data Model Definitions (revision) Working Group 2nd recirculation ballot



Dear colleagues, 

This is the first friendly reminder about the IEEE P802.3.2 (IEEE 802.3.2a)/D1.2 Ethernet YANG Data Model Definitions (revision) Working Group 2nd recirculation ballot.

Best regards,
Marek Hajduczenia
Chair, IEEE P802.3.2 (IEEE 802.3.2a) Ethernet YANG Data Model Definitions (revision) Task Force 

-----Original Message-----
From: Marek Hajduczenia <mxhajduczenia@xxxxxxxxx> 
Sent: Thursday, April 11, 2024 10:56 AM
To: 'stds-802-3-maint@xxxxxxxxxxxxxxxxx' <stds-802-3-maint@xxxxxxxxxxxxxxxxx>; 'stds-802-yang@xxxxxxxxxxxxxxxxx' <stds-802-yang@xxxxxxxxxxxxxxxxx>
Cc: Law, David <dlaw@xxxxxxx>; Adam Healey <adam.healey@xxxxxxxxxxxx> <adam.healey@xxxxxxxxxxxx>; Ulf Parkholm X <ulf.x.parkholm@xxxxxxxxxxxx>
Subject: IEEE P802.3.2 (IEEE 802.3.2a)/D1.2 Ethernet YANG Data Model Definitions (revision) Working Group 2nd recirculation ballot

Dear Task Force Participants,

With this e-mail, I'd like to announce the start of the IEEE P802.3.2 (IEEE 802.3.2a)/D1.2 Ethernet YANG Data Model Definitions (revision) Working Group 2nd recirculation ballot.

Open date: Thursday 11th April 2024
Close date: Friday 26th April 2024 23:59 AOE

As stated in the announcement below, the ballot group for this draft is the IEEE 802.3 voting membership as of Monday 20th November 2023. All comments received before the close of ballot will be considered, the one limitation however is that if you are not a member of the balloting group, and therefore cannot cast a ballot, you cannot designate comments as TR or ER since you cannot cast a Disapprove ballot.

Best regards,
Marek Hajduczenia
Chair, IEEE P802.3.2 (IEEE 802.3.2a) Ethernet YANG Data Model Definitions (revision) Task Force 

-----

Dear Colleagues,

This is the announcement of the electronic IEEE 802.3 Working Group 2nd recirculation ballot of the revision IEEE P802.3.2 (IEEE 802.3.2a) Ethernet YANG Data Model Definitions (revision). Remember that voting, as well as attendance, is a requirement to maintain your IEEE 802.3 member (voter) status <http://ieee802.org/3/rules/member.html#DOT3>. Instructions for accessing the draft, casting your ballot and submitting comments follow this announcement. Please review the commenting instructions below to ensure you are using the most up to date tools.

The ballot group for this draft is the IEEE 802.3 voting membership as of Monday 20th November 2023.

Because this is a recirculation ballot, YOU ONLY NEED TO CAST A BALLOT IF YOU WISH TO CHANGE YOUR VOTE FROM THAT WHICH WAS RECORDED ON THE INITIAL BALLOT OR LAST RECIRCULATION. If you voted previously and your vote has not changed, the last ballot cast will be carried over to this ballot and you do not need to cast a new ballot.

BALLOT SCOPE:
During this IEEE 802.3 Working Group 2nd recirculation ballot, the scope of the ballot is the substantive changes between IEEE P802.3.2 (IEEE 802.3.2a)/D1.1 and IEEE P802.3.2 (IEEE 802.3.2a)/D1.2 and the unsatisfied negative comments.

BALLOT OPEN:
Thursday 11th April 2024

BALLOT CLOSE:
Friday 26th April 2024 23:59 AOE

The Project Authorization Request for this Revision is available at <https://ieee802.org/3/2/a/P802d3d2_PAR.pdf> and includes the following:

TITLE:
Standard for Ethernet - YANG Data Model Definitions

SCOPE OF PROJECT:
This standard defines YANG data models for IEEE Std 802.3 Ethernet.

NEED FOR THE PROJECT:
This revision is to addresses accumulated maintenance changes as well as appropriate updates to the IEEE Std 802.3.2 YANG modules to support IEEE Std 802.3 amendments published since IEEE Std 802.3.2 was first published.

Thank you for your participation in this ballot and careful review of the draft.

David Law
Chair, IEEE 802.3 Ethernet Working Group
Phone: +44 1631 563729
Email: david_law@xxxxxxxx

Marek Hajduczenia
Chair, IEEE P802.3.2 (IEEE 802.3.2a) Ethernet YANG Data Model Definitions (revision) Task Force
Phone: +1 720 536 1366
Email: marek.hajduczenia@xxxxxxxxxxx

----------------------------------------------------------------

INSTRUCTIONS FOR BALLOTING ON: IEEE P802.3.2 (IEEE 802.3.2a) draft D1.2

Instructions for accessing the ballot documents, casting your ballot and submitting comments follow.

HOW TO ACCESS THE DRAFT
The draft is posted for your review for balloting purposes only, and neither the draft nor access information should be copied or redistributed to others in violation of document copyrights.

The IEEE P802.3.2 (IEEE 802.3.2a) Ethernet YANG Data Model Definitions (revision) draft D1.2 may be downloaded from:

URL: <https://www.ieee802.org/3/2/a/private/802.3.2a.D1.2.pdf>
Username: <IEEE 802.3 or IEEE 802.3.2a username>
Password: <IEEE 802.3 or IEEE 802.3.2a password>

Please submit comments against the above draft.

A comparison file between IEEE P802.3.2 (IEEE 802.3.2a) Ethernet YANG Data Model Definitions (revision) draft D1.1 and D1.2 is also provided to both focus and ease your review. Please DO NOT comment on this comparison document. This draft may be downloaded from:

<https://www.ieee802.org/3/2/a/private/802.3.2a.D1.2.CMP.pdf>

In addition, machine readable YANG modules may be downloaded from:

<https://www.ieee802.org/3/2/a/private/802.3.2a.D1.2.yang.zip>

A comparison between IEEE P802.3.2 (IEEE 802.3.2a) Ethernet YANG Data Model Definitions (revision) draft D1.1 and D1.2 machine readable YANG modules may be downloaded from:

<https://www.ieee802.org/3/2/a/private/802.3.2a.D1.2.Yang.CMP.pdf>

Please DO NOT submit comments against any of the above three document.


Unsatisfied negative comments, and their dispositions may be downloaded from:

<https://www.ieee802.org/3/2/a/comments/D1.0/802d3d2a_D1_0_unsatisfied.pdf>

All comments, and their dispositions, from the 1st recirculation ballot may be downloaded from:

<https://www.ieee802.org/3/2/a/comments/D1.1/802d3d2a_D1_1_approved.pdf>


All of these documents are posted in Adobe "pdf" document format and can be downloaded and printed if desired. If you do not have Adobe Acrobat Reader, it is available for free downloading from:

<http://www.adobe.com/prodindex/acrobat/readstep.html>


HOW TO CAST YOUR BALLOT

To assure your ballot is counted, please:

1) Send your ballot to: stds-802-3-ballot@xxxxxxxx

2) Paste the following line into the subject field:

IEEE P802.3.2 (IEEE 802.3.2a) Ethernet YANG Data Model Definitions (revision) D1.2 ballot

This can be done with this link <mailto:stds-802-3-ballot@xxxxxxxx?subject=IEEE%20P802.3.2%20(IEEE%20802.3.2a)%20Ethernet%20YANG%20Data%20Model%20Definitions%20(revision)%20D1.2%20ballot>

3) Paste into the message body and complete the ballot form below:

-----CUT AND PASTE TEXT BELOW THIS LINE ONLY PLEASE--------

IEEE P802.3.2 (IEEE 802.3.2a) Ethernet YANG Data Model Definitions (revision) D1.2 ballot

Your Name:___________________________


 ___ APPROVE ALL WITHOUT COMMENT

 ___ APPROVE ALL WITH COMMENTS on SOME
       (All comments are non-binding)

 ___ DISAPPROVE
       (Some or all comments are binding; a voter must submit specific comments for remedy)

 ___ ABSTAIN, Lack of Expertise

 ___ ABSTAIN, Lack of Time


-----------------------end ballot form--------------------

HOW TO SUBMIT COMMENTS

Acceptable comment types:

E = Editorial
ER = Editorial Required (a binding comment that is part of a DISAPPROVE vote, therefore only appropriate for an IEEE 802.3 voting member) T = Technical TR = Technical Required (a binding comment that is part of a DISAPPROVE vote, therefore only appropriate for an IEEE 802.3 voting member)

1. Prepare your comments in one of the following two ways. You are STRONGLY REQUESTED to use the spreadsheet. A comment entry tutorial is available at:

<http://ieee802.org/3/ballots/p802d3_comment_entry_tutorial.pdf>

a. Access the comment spreadsheet at the URL:

<http://www.ieee802.org/3/WG_tools/spreadsheet/802d3_TFR_WGB_comments.xls>

b. To submit comments in text (ASCII) form, please use the form below. This will make it possible for the editor to properly record and track all submissions. Make as many copies of the template as necessary and submit as an ASCII text file or as part of your e-mail.

PLEASE NOTE: The ASCII method involves a manual transcription; hence you are recommended to check your comments to ensure accurate transcription when the comment file is made available. Please use one of the comment tools above if possible.

 ------CUT AND PASTE TEXT BELOW THIS LINE ONLY PLEASE--------

 CommentID: (Leave Blank)
 CommenterName:
 CommenterCompany:
 Clause:
 Subclause:
 Page:
 Line:
 CommentType: (E, ER, T, or TR)
 Comment:
 CommentEnd:
 SuggestedRemedy:
 RemedyEnd:

 --------------------end comment template------------------

2. Send your comments to: stds-802-3-ballot@xxxxxxxx and paste into the subject line:

IEEE P802.3.2 (IEEE 802.3.2a) Ethernet YANG Data Model Definitions (revision) D1.2 comments

This can be done with this link <mailto:stds-802-3-ballot@xxxxxxxx?subject=IEEE%20P802.3.2%20(IEEE%20802.3.2a)%20Ethernet%20YANG%20Data%20Model%20Definitions%20(revision)%20D1.2%20comments>

________________________________________________________________________
To unsubscribe from the STDS-802-YANG list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-YANG&A=1