| Thread Links | Date Links | ||||
|---|---|---|---|---|---|
| Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
|
All: The ballot for the isolation fix to the existing
PoE standard opened yesterday. This is a critical fix to a section of the
standard that everyone on this list should be interested in seeing
progressed. Please find the time review the draft, to make meaningful
comments if necessary and, if you are a voter, to vote. You may comment
on the draft even if you are not a voter; though you may not, of course, vote. If you are new to 802.3 ways, the
corrigendum project will be an excellent learning process. Take the time
on a short draft to learn how to vote, take the time to participate in the
comment resolution process to learn that critical operation, when the time
comes take the time to register for the sponsor pool and learn how that process
goes. We will all be well served if we use this chance to get up to speed
on the IEEE way of doing things while we have time and the task is relatively
constrained. Cheers Mike PS – Start collecting some idea for
the January P802.3at interim.
Voice: +1 603 222 8686 From: Grow, Bob
[mailto:bob.grow@xxxxxxxxx] IEEE 802.3 Working Group
Voters, Observers, and Liaisons: This is the announcement of
the electronic IEEE 802.3 Working Group ballot on P802.3-2005/Cor1/D1.0, Corrigendum
1 to IEEE Std 802.3-2005 (working group reference is 802.3au). Remember
that voting as well as attendance is a requirement to maintain your 802.3
member (voter) status. Instructions for accessing
the draft, casting your ballot and submitting comments follow this
announcement. As other 802.3 WG ballots will be running in parallel,
proper subject lines on ballots and comments are essential for your ballot and
comments to be accepted. The corrigendum is based on
the approved revision of IEEE Std 802.3. IEEE Std 802.3-2005 is in
publication preparation with publication expected in early December (during
this ballot). The draft will be compared by the editor and reconciled
against IEEE Std 802.3-2005 when it is available. TITLE: Draft: Information
technology -- Telecommunications and information exchange between systems --
Local and metropolitan area networks -- specific requirements Part 3: Carrier
Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and
Physical Layer Specifications Corrigendum 1 BALLOT SCOPE: As an initial WG ballot, the
scope of the ballot is the complete P802.3-2005/Cor1/D1.0 draft.
BALLOT OPEN: Monday, 21 November 2005 BALLOT CLOSE: Tuesday, 27 December 2005 Unfortunately, this ballot
close may even fall on an employer granted holiday for some ballot
participants. Please plan accordingly -- you may want to schedule
your own earlier personal due date for your ballot and comments. Thank you for your
participation in this ballot and careful review of the draft. Bob Grow, Chair IEEE 802.3 Phone: 858-391-4622 Email: bob.grow@xxxxxxxx ----------------------------------------------------------------- ****INSTRUCTIONS FOR
BALLOTING ON: P802.3-2005/Cor1/D1.0 Instructions for accessing
the ballot documents, casting your ballot and submitting comments follow. HOW TO ACCESS THE DRAFT The ballot documents are
posted for your review for balloting purposes only, and neither the documents nor
access information should be copied or redistributed to others in violation of
document copyrights. The Cor1/D1.0 draft may be downloaded from: http://www.ieee802.org/3/private/maint/iso_corr/d1.0/P802_cor1_D1p0.pdf
Login: >> Reply to this message (mike_mccormack)
with a request to obtain username Password: >>
Reply to this message (mike_mccormack) with a request to obtain password The documents are posted in
Adobe "pdf" document format and can be downloaded and printed if
desired. If you do not have Adobe Acrobat Reader, it is available for
free downloading from Adobe at: http://www.adobe.com/prodindex/acrobat/readstep.html.
HOW TO CAST YOUR BALLOT To assure your ballot is
counted, please: 1) send your ballot to:
stds-802-3-ballot@xxxxxxxx
2) paste the following line
into the subject field: Cor1/D1.0
Ballot 3) paste into the message
body and complete the ballot -----CUT AND PASTE TEXT
BELOW THIS LINE ONLY PLEASE--------
P802.3-2005/Cor1/D1.0 WORKING GROUP BALLOT Your
Name:___________________________ ___ APPROVE
WITHOUT COMMENT ___
APPROVE WITH COMMENT
(All comments are non-binding) ___
DISAPPROVE
(A voter must attach specific comments for remedy. Some
or all comments are binding.) ___
ABSTAIN, Lack of Expertise ___
ABSTAIN, Lack of Time -----------------------end
ballot form-------------------- HOW TO SUBMIT COMMENTS Acceptable comment types: E =
Editorial ER =
Editorial Required (a binding comment that is
part of a DISAPPROVE vote, therefore only
appropriate for an 802.3 voting member) T =
Technical TR =
Technical Required (a binding comment that is
part of a DISAPPROVE vote, therefore only
appropriate for an 802.3 voting member) 1. Prepare your comments
using the text (ASCII) form below. This will make it possible for the
editor to properly record and track all submissions. Make as many copies
of the template as necessary and submit as an ascii text file or as part of
your e-mail. ------CUT AND PASTE TEXT
BELOW THIS LINE ONLY PLEASE-------- CommentID: (Leave Blank) CommenterName: CommenterEmail: CommenterPhone: CommenterCellPhone: CommenterCompany: Clause: Subclause: Page: Line: CommentType: (E, ER, T, or
TR) Comment: CommentEnd: SuggestedRemedy: RemedyEnd: --------------------end
comment template------------------ 3. Send your comments
to:
stds-802-3-ballot@xxxxxxxx and paste
into the subject line:
Cor1/D1.0 Comments |