Thread Links			Date Links
Thread Prev	Thread Next	Thread Index	Date Prev	Date Next	Date Index

Re: [802.3af] Ethernet pairs for inline power

To: "McMillan, Paul" <Paul.Mcmillan@xxxxxxxxxxxxxxx>
Subject: Re: [802.3af] Ethernet pairs for inline power
From: Geoff Thompson <gthompso@xxxxxxxxxxxxxxxxxx>
Date: Mon, 11 Feb 2002 10:02:59 -0800
Cc: "'stds-802-3-pwrviamdi@xxxxxxxx'" <stds-802-3-pwrviamdi@xxxxxxxx>
In-Reply-To: <8DB38CB960D0C2498BD672AC38144AFD0154C4AC@xxxxxxxxxxxxxxxxxxxxxxxx>
Sender: owner-stds-802-3-pwrviamdi@xxxxxxxxxxxxxxxxxx


Paul-

Either from the far end

Only 4,5,7, and 8 for mid-span insertion

Geoff




At 09:35 AM 2/11/02 -0800, McMillan, Paul wrote:

>  I am new to this forum and I have a rather basic question
>
>A requirements document that was put out 2 years ago had stated that either
>pairs 1,2,3, and 6 or 4,5,7, and 8 were acceptable to use as part of the
>802.3af standard. Is this still true today or is only one method approved.
>
>  Regards
>Paul McMillan
>Solutions Architect
>Siemens Enterprise Networks
>Penn-Jersey Region
>RNET 590-3527
>Outside (610)-660-3527

References:
- [802.3af] Ethernet pairs for inline power
  - From: McMillan, Paul

Prev by Date: RE: [802.3af] Ethernet pairs for inline power
Next by Date: RE: [802.3af] Ethernet pairs for inline power
Prev by thread: [802.3af] Ethernet pairs for inline power
Next by thread: RE: [802.3af] Ethernet pairs for inline power
Index(es):
- Date
- Thread