| Eldad:
The audio quality of the last call was horrendous, and wasted nearly half the call. The webex that we have used, and that is still shown on the IEEE 802.11 website, is going to have to be changed. Dick Roy offered to try to get us a better alternative, which he just managed to get approval for, and I don’t know if it is just for this week, or until we can get a better service. Jim is at an offsite in the UK, so didn’t have the opportunity to make this last minute change. I am sorry if you got confused.
Dick, thank you for taking care of this.
Rich Kennedy rkennedy1000@xxxxxxxxx(832) 298-1114 IEEE 802.11 TGaf (WLAN in White Spaces) Chair IEEE 802.11 Regulatory SC Chair IEEE 802.11/18 Liaison
This does NOT match the conference call information on the 802.11 website, which I just copied below. And unless I missed an email, I never saw a change of bridge announced to the REG or 802.11 reflector. The Reg SC leadership needs to send an email to the reflector when they have this mess sorted out. Till then I’m assuming that the 802.11 website conference information is the official bridge information, not some bridge information sent out by some random person. Regards, Eldad Meeting ID/Number: 958 775 777 Meeting Password: UNII4 To join this meeting (Now from mobile devices!) 2.tIf requested, enter your name and email address. 3.tIf a password is required, enter the meeting password: UNII4 4.tClick “Join”. 5.tFollow the instructions that appear on your screen. Audio conference information 1.tProvide your number when you join the meeting to receive a call back. Alternatively, you can call one of the following numbers: Internal: 22-66 UK: 44-1223-692266 US: 1-408-5234266 China: 86-21-28981566 Taiwan: 886-2-21759266 Japan: 81-3-64037166 Singapore: 65-6827-0536 Korea: 82-2-6444-2066 India: 91-80-2518-3266 Israel: 972-4-854-6185 Germany: 49-761-59521166 2.tFollow the instructions that you hear on the phone. Your Cisco Unified MeetingPlace meeting ID: 958 775 777 Andy, You may recall the audio issues we had with the call last Friday. I offered to host this week's meeting since the webex account to which I have access allows audio conferencing using your laptop's audio capabilities (microphone) rather than having to dial in. Jim took me up on the offer on a "trial basis". So, this week we'll try the ISO webex facility, and make a decision after we see how well it works whether to use CSR's webex or not going forward. So, the webex info I sent you is for this Friday's meeting only until further notice. Hope this helps. Cheers, RR Mr. Roy, Thank you. However, I'm confused. Does this information replace in whole or in part the call coordinates already published on the group's web site? See http://www.ieee802.org/11/ Andy Scott Vice President, Engineering NCTA 25 Massachusetts Avenue, N.W. Suite 100 Wasington DC, 20001 202.222.2475 From: Dick Roy [mailto:messenger@xxxxxxxxx]
Sent: Wednesday, November 06, 2013 9:37 PM
To: Andy Scott
Subject: Meeting invitation: DSRC 5.9GHz Tiger Team
Hello ,
Dick Roy invites you to attend this online meeting.
Topic: DSRC 5.9GHz Tiger Team
Date: Friday, November 8, 2013
Time: 10:00 am, Pacific Standard Time (San Francisco, GMT-08:00)
Meeting Number: 952 177 390
Meeting Password: TigerTeam
-------------------------------------------------------
To join the online meeting (Now from mobile devices!)
-------------------------------------------------------
1. Go to https://iso-meetings.webex.com/iso-meetings/j.php?ED=235152027&UID=1697768587&PW=NMjJkMzE1ZjY3&RT=MiM0
2. If requested, enter your name and email address.
3. If a password is required, enter the meeting password: TigerTeam
4. Click "Join".
To view in other time zones or languages, please click the link:
https://iso-meetings.webex.com/iso-meetings/j.php?ED=235152027&UID=1697768587&PW=NMjJkMzE1ZjY3&ORT=MiM0
-------------------------------------------------------
To join the audio conference only
-------------------------------------------------------
To receive a call back, provide your phone number when you join the meeting, or call the number below and enter the access code.
Call-in toll-free number (UK): 0800-051-3810
Call-in toll number (UK): +44-203-478-5289
Global call-in numbers: https://iso-meetings.webex.com/iso-meetings/globalcallin.php?serviceType=MC&ED=235152027&tollFree=1
Toll-free dialing restrictions: http://www.webex.com/pdf/tollfree_restrictions.pdf
Access code:952 177 390
-------------------------------------------------------
For assistance
-------------------------------------------------------
1. Go to https://iso-meetings.webex.com/iso-meetings/mc
2. On the left navigation bar, click "Support".
You can contact me at:
dickroy@xxxxxxxxxxxx
To add this meeting to your calendar program (for example Microsoft Outlook), click this link:
https://iso-meetings.webex.com/iso-meetings/j.php?ED=235152027&UID=1697768587&ICS=MI&LD=1&RD=2&ST=1&SHA2=AAAAAq0Nkx4S9cAVHUQHnQvt3dTMHWvRhFUUPn/s5cbNTJ8G&RT=MiM0
The playback of UCF (Universal Communications Format) rich media files requires appropriate players. To view this type of rich media files in the meeting, please check whether you have the players installed on your computer by going to https://iso-meetings.webex.com/iso-meetings/systemdiagnosis.php.
http://www.webex.com
CCP:+442034785289x952177390#
IMPORTANT NOTICE: This WebEx service includes a feature that allows audio and any documents and other materials exchanged or viewed during the session to be recorded. By joining this session, you automatically consent to such recordings. If you do not consent to the recording, discuss your concerns with the meeting host prior to the start of the recording or do not join the session. Please note that any such recordings may be subject to discovery in the event of litigation._______________________________________________________________________________ If you wish to be removed from this reflector, do not send your request to this reflector - it will have no effect. Instead, go to http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-REG and then press the LEAVE button. Further information can be found at: http://www.ieee802.org/11/Email_Subscribe.html_______________________________________________________________________________
If you wish to be removed from this reflector, do not send your request to this reflector - it will have no effect.
Instead, go to http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-REG and then press the LEAVE button.
Further information can be found at: http://www.ieee802.org/11/Email_Subscribe.html
_______________________________________________________________________________
|