Re: [STDS-802-11-TGAX] 答复: [STDS-802-11-TGAX] Finish unsolved CID in today's PHY ad hoc

[Bo Sun <sun.bo1@xxxxxxxxxx>]

Hi, Ming,

If the CRs are related to both MAC and
PHY, I would suggest to present them in TG session.

If you insist to present it in PHY adhoc,
I can add your CR into the PHY list. We will have a PHY ad-hoc in PM2 today
and I will ask for request to change the presentation order. But at the
beginning of the PM2 session, we will re-visit some deferred SPs. Your
CRs can only be allocated after that. Meanwhile, please also inform the
MAC chair to transfer those CIDs from MAC adhoc to PHY adhoc.


Best Regards,

孙 波   Sun, Bo





发件人:         "Ganming (Ming)" <ming.gan@xxxxxxxxxx>
收件人:         STDS-802-11-TGAX@xxxxxxxxxxxxxxxxx,
日期:         2016/09/13 13:43
主题:        [STDS-802-11-TGAX] 答复: [STDS-802-11-TGAX] Finish unsolved CID in today's PHY ad hoc
发件人:        "*** 802.11 TGax - HEW - High Efficiency WLAN ***" <STDS-802-11-TGAX@xxxxxxxx>

---

Hello Bo,
 
I have a comment and resolution
for “Service field” section which I presented it in MAC section but
people think it is related to PHY
 
The title is “11-16-0942-01-00ax-cr-service-field”,
could you help me put it in the front of the queue? 
 
Best wishes,
Ming Gan 
 
发件人: *** 802.11 TGax - HEW
- High Efficiency WLAN *** [mailto:STDS-802-11-TGAX@xxxxxxxx]
代表 Bo Sun
发送时间: 2016年9月13日 9:21
收件人: STDS-802-11-TGAX@xxxxxxxxxxxxxxxxx
主题: Re: [STDS-802-11-TGAX] Finish unsolved CID in today's PHY ad
hoc
 
Thanks, Ross.

You can run the SPs at today's PHY adhoc after Yan's.


Best Regards,

孙 波   Sun, Bo

 



发件人:         "Yujian (Ross)" <ross.yujian@xxxxxxxxxx>
收件人:         "sun.bo1@xxxxxxxxxx" <sun.bo1@xxxxxxxxxx>,
抄送:        "STDS-802-11-TGAX@xxxxxxxxxxxxxxxxx" <STDS-802-11-TGAX@xxxxxxxxxxxxxxxxx>, James Wang <james.wang@xxxxxxxxxxxx>, Daewon Lee <daewon.lee@xxxxxxxxxxxx>
日期:         2016/09/13 08:53
主题:        Finish unsolved CID in today's PHY ad hoc

---

Hi Bo and all, 
  
In last PHY ad-hoc meeting, CID 2105 & 336 (CR Packet Extension) were
deferred due to the modifications suggested by Daewon. I have solved it
and uploaded a 16-1150r3. And I am ready to present it. Maybe I could continue
to finish it after Yan’s pending SPs.
  
One more thing, as suggested by James, for CID 226 (CR HE-SIG-A), previously
antenna port is used, which is not specified in the spec before. Hence,
it is proposed to use antenna connector instead. I have already made the
modification and uploaded 16-1148r2. I hope to re-run the SP of CID 226
based on r2. 
  
Thanks 
  
Ross 
  
_______________________________________________________________________________

If you wish to be removed from this reflector, do not send your request to this reflector - it will have no effect.

Instead, go to http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGAX and then press the LEAVE button.

Further information can be found at: http://www.ieee802.org/11/Email_Subscribe.html _______________________________________________________________________________

_______________________________________________________________________________

If you wish to be removed from this reflector, do not send your request to this reflector - it will have no effect.

Instead, go to http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGAX and then press the LEAVE button.

Further information can be found at: http://www.ieee802.org/11/Email_Subscribe.html _______________________________________________________________________________

_______________________________________________________________________________

If you wish to be removed from this reflector, do not send your request to this reflector - it will have no effect.

Instead, go to http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGAX and then press the LEAVE button.

Further information can be found at: http://www.ieee802.org/11/Email_Subscribe.html _______________________________________________________________________________