Re: [STDS-802-11-TGBA] Updated D0.01

[Bin Tian <btian@xxxxxxxxxxxxxxxx>]

Good catch, Yunsong. The two values should be swapped. Let’s correct it in the next version.

 

Thanks,

Bin

 

From: *** 802.11 TGba - WUR- Wake-up Radio Operation *** [mailto:STDS-802-11-TGBA@xxxxxxxx] On Behalf Of Yangyunsong
Sent: Tuesday, November 21, 2017 4:01 PM
To: STDS-802-11-TGBA@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBA] Updated D0.01

 

Hi Po-kai and Bin,

There is inconsistent description of MCS0 and MCS1 in Clause 32. The text says that T_SYM0 is 4 usec and T_SYM1  is 2 usec, while T_WUR-SYNC0  is 64 usec and T_WUR-SYNC1  is 128 usec. Believe the later pair should be swapped if MCS0 is meant to be the lower rate.

 

Thanks,

Yunsong Yang

Huawei Device USA Inc.

10180 Telesis Court, STE 165

San Diego, CA 92121

Phone: +1-858-754-3638

 

From: *** 802.11 TGba - WUR- Wake-up Radio Operation *** [mailto:STDS-802-11-TGBA@xxxxxxxx] On Behalf Of Huang, Po-kai
Sent: Tuesday, November 21, 2017 3:42 PM
To: STDS-802-11-TGBA@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11-TGBA] Updated D0.01

 

Dear all,

 

              As discussed in Nov f2f meeting, Bin has kindly helped us to revise the WUR PHY skeleton and provide two tables for timing-related parameters and frequently used parameters. I have incorporated the changes in D0.01. Please check the link below. (See Clause 32 for the skeleton change. See table 32-1 and 32-2 for the proposed parameters.) The RTF files for each clause are also attached.

 

              https://mentor.ieee.org/802.11/dcn/17/11-17-1585-01-00ba-proposed-draft-specification.pdf

 

              I believe that PHY spec writing is a continuous process. Please let us know if there are further comments to improve D0.01 and help on the spec writing process.

 

Best,

Po-Kai