Re: [STDS-802-11-TGBE] PDT PHY

Thread Links	Date Links
Thread Prev	Thread Next	Thread Index	Date Prev	Date Next	Date Index

Hello Youhan,

Thanks for addressing majority of my comments.

re my comment on \N_{SYM, RX}, let me rephrase my question as follows:

After equation (34-X5), you wrote that \N_{SYM, RX} is given by Equation (34-X6). I suppose you wrote this because it appears in one of your earlier equations in the document.

However, for the equations (34-X1), (34-X2), (34-X3), (34-X4), and (34-X5), I cannot find any \N_{SYM, RX} therein. The only related symbol I find is \N_{SYM}.

Please kindly let me know if I overlook anything.

Regards,
Edward

On Thu, Sep 10, 2020 at 2:15 AM Youhan Kim <youhank@xxxxxxxxxxxxxxxx> wrote:

Thanks, Edward.

11-20/1294r3 has made additional changes, including some addressing your comments.

Regards,

Youhan

From: Edward Au <edward.ks.au@xxxxxxxxx>
Sent: Wednesday, September 9, 2020 2:57 PM
To: Youhan Kim <youhank@xxxxxxxxxxxxxxxx>
Cc: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] PDT PHY - EHT PLME

CAUTION: This email originated from outside of the organization.

Hello Youhan,

Enclosed please find my editorial comments on a few equations.

Regards,
Edward

On Tue, Aug 25, 2020 at 11:09 AM Edward Au <edward.ks.au@xxxxxxxxx> wrote:

Thanks a lot, Youhan!

Regards,
Edward

On Tue, Aug 25, 2020 at 10:46 AM Youhan Kim <youhank@xxxxxxxxxxxxxxxx> wrote:

Thank you, Edward.

You are correct. Fixed in r1.

Regards,

Youhan

From: Edward Au <edward.ks.au@xxxxxxxxx>
Sent: Tuesday, August 25, 2020 7:40 AM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] PDT PHY - EHT PLME

CAUTION: This email originated from outside of the organization.

Hi Youhan,

Thanks for your work.

May I know if 27.4.2 (PHY MIB) as shown below is actually 33.X1.2 (PHY MIB)?

33.X1.1 PLME_SAP sublayer management primitives

Table 33-X1 (EHT PHY MIB attributes) lists the MIB attributes that may be accessed by the PHY entities and the intralayer of higher level LMEs. These attributes are accessed via the PLME-GET, PLME-SET, PLME-RESET, and PLME-CHARACTERISTICS primitives defined in 6.5 (PLME SAP interface).

27.4.2 PHY MIB

Thanks and Regards,
Edward

On Tue, Aug 25, 2020 at 2:52 AM Youhan Kim <youhank@xxxxxxxxxxxxxxxx> wrote:

Dear EHT PLME TTT members,

Initial draft is available at

https://mentor.ieee.org/802.11/dcn/20/11-20-1294-00-00be-pdt-phy-eht-plme.docx

Please let me know if you have any comments. Thank you.

Regards,

Youhan

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1