Got it. Thanks, Edward.
I have updated Equation (34-X5) in 11-20/1294r4 such that Nsym is now Nsym,RX.
Regards,
Youhan
From: Edward Au <edward.ks.au@xxxxxxxxx>
Sent: Thursday, September 10, 2020 8:04 AM
To: Youhan Kim <youhank@xxxxxxxxxxxxxxxx>
Cc: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] PDT PHY - EHT PLME
CAUTION: This email originated from outside of
the organization.
Thanks for addressing majority of my comments.
re my comment on \N_{SYM, RX}, let me rephrase my question as follows:
After equation (34-X5), you wrote that \N_{SYM, RX} is given by Equation (34-X6). I suppose you wrote this because it appears in one of your earlier equations in the document.
However, for the equations (34-X1), (34-X2), (34-X3), (34-X4), and (34-X5), I cannot find any \N_{SYM, RX} therein. The only related symbol I find is \N_{SYM}.
Please kindly let me know if I overlook anything.
Thanks, Edward.
11-20/1294r3 has made additional changes, including some addressing your comments.
Regards,
Youhan
From: Edward Au <edward.ks.au@xxxxxxxxx>
Sent: Wednesday, September 9, 2020 2:57 PM
To: Youhan Kim <youhank@xxxxxxxxxxxxxxxx>
Cc: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] PDT PHY - EHT PLME
CAUTION: This email originated from outside of
the organization.
Enclosed please find my editorial comments on a few equations.
Thanks a lot, Youhan!
Regards,
Edward
Thank you, Edward.
You are correct. Fixed in r1.
Regards,
Youhan
From: Edward Au <edward.ks.au@xxxxxxxxx>
Sent: Tuesday, August 25, 2020 7:40 AM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] PDT PHY - EHT PLME
CAUTION: This email originated from outside of
the organization.
May I know if 27.4.2 (PHY MIB) as shown below is actually 33.X1.2 (PHY MIB)?
33.X1.1 PLME_SAP sublayer management primitives
Table 33-X1 (EHT PHY MIB attributes) lists the MIB attributes that may be accessed by the PHY entities and the intralayer of higher level LMEs. These attributes are accessed via
the PLME-GET, PLME-SET, PLME-RESET, and PLME-CHARACTERISTICS primitives defined in 6.5 (PLME SAP interface).
27.4.2
PHY MIB
Thanks and Regards,
Edward
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
|