Thanks. Will upload this version.
Best regards,
Wook Bong Lee
Thanks Wookbong, looks good.
Rgards,
Ron
Thanks Ron.
Attached please find draft rev5 based on your comment.
Please let me know if you have further comment.
Best regards,
Wook Bong Lee
Hi Woobong,
Thanks. On 1) your suggestion is good, let’s keep BW320 TBD for now.
On 3) there are a couple of places in the 11ax spec stating “The … test shall be performed over at least 20 HE PPDUs. The PPDUs under test shall
be at
least 16 data OFDM symbols long”.
Regards,
Ron
Hi Ron,
Thanks for comments.
I have questions on your comments.
Please see inline.
Best regards,
Wook Bong Lee
Hi Wook bong
A few more comments:
1.
LO requirements are copied from 11ax but we have new BW320. Suggest to keep that TBD.
[WB] You mean make texts in section xx.3.19.4.2 TBD? Or you want to keep it but want to add text something like “The transmit center frequency leakage
for CBW320 PPDU is TBD”
2.
Need to rows for 4K QAM
[WB] Done. Now I have 4KQAM ¾ and 5/6.
3.
Need to add # of frames, # of symbols, # of PPDU for measurements
[WB] Can you clarify your comment? Maybe you can point me which text from 11ax is missing in the draft.
Thanks,
Ron
Thanks Yujin.
I accepted and uploaded new revision.
Best regards,
Wook Bong Lee
Hi, Wookbook and MJ
Thank you for sharing and updating the document.
Some modification in the attached.
It is very minor, so you may want to apply it when additional updates are implemented.
Regards,
Yujin
Hi Youhan,
Thank you for your comment.
MJ made updates based on your comment.
Please take a look at whether you have further comments or not.
It is uploaded to the server as well.
Best regards,
Wook Bong Lee
Hi, Wookbook and MJ.
Thanks for the nice work. Please see my comments attached. For 1253.
Regards,
Youhan
CAUTION: This email originated from outside of
the organization.
Hi all,
I just uploaded draft text proposal for PDT-PHY- Transmit specification: Clock frequency and modulation accuracy.
11-20/1252r0
PDT-PHY-Frequency Tolerance
11-20/1253r0
PDT-PHY-Modulation Accuracy
Please let us know if you have any comment.
Thanks MJ for your work.
Best regards,
Wook Bong Lee
Hello all,
This is for PHY- Transmit specification: Clock frequency and modulation accuracy.
As you can find in 11ax spec, we have following two sections for this.
-
34.3.19 – Transmit specification
-
34.3.19.3 Transmit center frequency and symbol clock frequency
-
34..3.19.4 Modulation accuracy
-
34.3.19.4.1 Introduction to modulation accuracy tests
-
34.3.19.4.2 Transmit center frequency leakage
-
34.3.19.4.3 Transmitter constellation error
There is one motion for these sections, i.e.
802.11be supports -38 dB as the Tx EVM requirement for 802.11be 4096 QAM.
[Motion 112, #SP20, [9] and [70]]
I have few things to discuss. For those thing, I am thinking we can make it TBD. Will write a contribution to discuss that.
Other than that, mostly it will be similar to 11ax.
MJ kindly volunteered for writing above sections.
He will share draft when it is ready.
If you have any suggestion, please let us know.
Best regards,
Wook Bong Lee
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1