Re: [STDS-802-11-TGBE] PDT-PHY- Transmit specification: Clock frequency

Thread Links	Date Links
Thread Prev	Thread Next	Thread Index	Date Prev	Date Next	Date Index

Hi Wook Bong,

Awesome - thank you for your comment.

Regards,
Edward

On Thu, Sep 10, 2020 at 12:14 PM Wook Bong Lee <wookbong.lee@xxxxxxxxxxx> wrote:

Hi Edward,

Thanks for comment.

The equation (xx-y4) and table (xx-y2) are EVM for unoccupied/unused subcarriers.

In case of 4x996, there is no unoccupied subcarriers as it is maximum RU size corresponding to 320MHz.

And thus, we don’t need 4x996-tone RU in those.

Similarly, in 11ax, we don’t have r=74, if 2x996-tone RU (equation 27-130) nor i_RU26,start for 2x996-tone RU (table 27-50).

Please let me know this is clear.

Best regards,

Wook Bong Lee

From: Edward Au [mailto:edward.ks.au@xxxxxxxxx]
Sent: Thursday, September 10, 2020 8:51 AM
To: Wook Bong Lee <wookbong.lee@xxxxxxxxxxx>
Cc: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] PDT-PHY- Transmit specification: Clock frequency and modulation accuracy

Hello Wook Bong,

In 1290r2, the MCS is defined up to 4x996-tone RU.

In equation (xx-y4) and Table (xx-y2) of 20/1253r5, you list up to (3x996+484)-tone RU. May I know if you will define 4x996-tone RU at a later stage?

Thanks,
Edward

On Wed, Sep 9, 2020 at 4:13 PM Wook Bong Lee <wookbong.lee@xxxxxxxxxxx> wrote:

Thanks. Will upload this version.

Best regards,

Wook Bong Lee

From: Ron Porat [mailto:ron.porat@xxxxxxxxxxxx]
Sent: Wednesday, September 9, 2020 12:31 PM
To: Wook Bong Lee <wookbong.lee@xxxxxxxxxxx>; STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: RE: [STDS-802-11-TGBE] PDT-PHY- Transmit specification: Clock frequency and modulation accuracy

Thanks Wookbong, looks good.

Rgards,

Ron

From: Wook Bong Lee [mailto:wookbong.lee@xxxxxxxxxxx]
Sent: Wednesday, September 09, 2020 10:54 AM
To: Ron Porat; STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: RE: [STDS-802-11-TGBE] PDT-PHY- Transmit specification: Clock frequency and modulation accuracy

Thanks Ron.

Attached please find draft rev5 based on your comment.

Please let me know if you have further comment.

Best regards,

Wook Bong Lee

From: Ron Porat [mailto:ron.porat@xxxxxxxxxxxx]
Sent: Wednesday, September 9, 2020 9:57 AM
To: Wook Bong Lee <wookbong.lee@xxxxxxxxxxx>; STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: RE: [STDS-802-11-TGBE] PDT-PHY- Transmit specification: Clock frequency and modulation accuracy

Hi Woobong,

Thanks. On 1) your suggestion is good, let’s keep BW320 TBD for now.

On 3) there are a couple of places in the 11ax spec stating “The … test shall be performed over at least 20 HE PPDUs. The PPDUs under test shall be at

least 16 data OFDM symbols long”.

Regards,

Ron

From: Wook Bong Lee [mailto:wookbong.lee@xxxxxxxxxxx]
Sent: Wednesday, September 09, 2020 9:01 AM
To: Ron Porat; STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: RE: [STDS-802-11-TGBE] PDT-PHY- Transmit specification: Clock frequency and modulation accuracy

Hi Ron,

Thanks for comments.

I have questions on your comments.

Please see inline.

Best regards,

Wook Bong Lee

From: Ron Porat [mailto:ron.porat@xxxxxxxxxxxx]
Sent: Tuesday, September 8, 2020 6:31 PM
To: Wook Bong Lee <wookbong.lee@xxxxxxxxxxx>; STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: RE: [STDS-802-11-TGBE] PDT-PHY- Transmit specification: Clock frequency and modulation accuracy

Hi Wook bong

A few more comments:

1.      LO requirements are copied from 11ax but we have new BW320. Suggest to keep that TBD.

[WB] You mean make texts in section xx.3.19.4.2 TBD? Or you want to keep it but want to add text something like “The transmit center frequency leakage for CBW320 PPDU is TBD”

2.      Need to rows for 4K QAM

[WB] Done. Now I have 4KQAM ¾ and 5/6.

3.      Need to add # of frames, # of symbols, # of PPDU for measurements

[WB] Can you clarify your comment? Maybe you can point me which text from 11ax is missing in the draft.

Thanks,

Ron

From: Wook Bong Lee [mailto:wookbong.lee@xxxxxxxxxxx]
Sent: Thursday, August 27, 2020 1:46 PM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] PDT-PHY- Transmit specification: Clock frequency and modulation accuracy

Thanks Yujin.

I accepted and uploaded new revision.

Best regards,

Wook Bong Lee

From: Yujin Noh [mailto:yujin.noh@xxxxxxxxxxxx]
Sent: Thursday, August 27, 2020 1:14 PM
To: Wook Bong Lee <wookbong.lee@xxxxxxxxxxx>; STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: RE: [STDS-802-11-TGBE] PDT-PHY- Transmit specification: Clock frequency and modulation accuracy

Hi, Wookbook and MJ

Thank you for sharing and updating the document.

Some modification in the attached.

It is very minor, so you may want to apply it when additional updates are implemented.

Regards,

Yujin

From: Wook Bong Lee <wookbong.lee@xxxxxxxxxxx>
Sent: Wednesday, August 26, 2020 11:59 AM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] PDT-PHY- Transmit specification: Clock frequency and modulation accuracy

Hi Youhan,

Thank you for your comment.

MJ made updates based on your comment.

Please take a look at whether you have further comments or not.

It is uploaded to the server as well.

Best regards,

Wook Bong Lee

From: Youhan Kim [mailto:youhank@xxxxxxxxxxxxxxxxx]
Sent: Tuesday, August 25, 2020 4:05 PM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] PDT-PHY- Transmit specification: Clock frequency and modulation accuracy

Hi, Wookbook and MJ.

Thanks for the nice work. Please see my comments attached. For 1253.

Regards,

Youhan

From: Wook Bong Lee <wookbong.lee@xxxxxxxxxxx>
Sent: Thursday, August 20, 2020 7:36 AM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] PDT-PHY- Transmit specification: Clock frequency and modulation accuracy

CAUTION: This email originated from outside of the organization.

Hi all,

I just uploaded draft text proposal for PDT-PHY- Transmit specification: Clock frequency and modulation accuracy.

11-20/1252r0 PDT-PHY-Frequency Tolerance

11-20/1253r0 PDT-PHY-Modulation Accuracy

Please let us know if you have any comment.

Thanks MJ for your work.

Best regards,

Wook Bong Lee

From: Wook Bong Lee
Sent: Friday, July 31, 2020 5:27 PM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Cc: 'mj1108.kim@xxxxxxxxxxx'
Subject: PDT-PHY- Transmit specification: Clock frequency and modulation accuracy

Hello all,

This is for PHY- Transmit specification: Clock frequency and modulation accuracy.

As you can find in 11ax spec, we have following two sections for this.

34.3.19 – Transmit specification

34.3.19.3 Transmit center frequency and symbol clock frequency
34..3.19.4 Modulation accuracy

34.3.19.4.1 Introduction to modulation accuracy tests
34.3.19.4.2 Transmit center frequency leakage
34.3.19.4.3 Transmitter constellation error

There is one motion for these sections, i.e.

802.11be supports -38 dB as the Tx EVM requirement for 802.11be 4096 QAM.

[Motion 112, #SP20, [9] and [70]]

I have few things to discuss. For those thing, I am thinking we can make it TBD. Will write a contribution to discuss that.

Other than that, mostly it will be similar to 11ax.

MJ kindly volunteered for writing above sections.

He will share draft when it is ready.

If you have any suggestion, please let us know.

Best regards,

Wook Bong Lee

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1