Re: [STDS-802-11-TGBE] PDT-MAC-MLO: General and Multi-link setup: Proced

Thread Links	Date Links
Thread Prev	Thread Next	Thread Index	Date Prev	Date Next	Date Index

Hi Arik,

Thanks for the detailed review. Please see my response in the attachment.

Best,

Po-Kai

From: Arik Klein <arik.klein@xxxxxxxxxx>
Sent: Monday, September 14, 2020 10:14 AM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] PDT-MAC-MLO: General and Multi-link setup: Procedure

Hi Po-Kai,

Thanks for sharing the doc.

I’ve reviewed parts 1&2 in 11-20/1309r3.

Please find my comments and suggestions in the enclosed doc.

Regards,

Arik

From: Edward Au <edward.ks.au@xxxxxxxxx>
Sent: יום א 13 ספטמבר 2020 23:23
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] PDT-MAC-MLO: General and Multi-link setup: Procedure

Hello Po-Kai,

In 20/1309r3, you have the following instruction to the editor in subclause 11.3.5.3 and 11.3.5.5 (based on REVmd D4.0):

h) The SME shall refuse an association request from a VHT STA or non-AP M LD that does not support all of the <VHT-MCS, NSS> tuples indicated by the Basic VHT-MCS And NSS Set field of the VHT Operation parameter of the AP or the corresponding AP in each setup link, respectively, in the MLME-START.request primitive.

h) The SME shall refuse a reassociation request from a VHT STA or a non-AP MLD that does not support all of the <VHT-MCS, NSS> tuples indicated by the Basic VHT-MCS And NSS Set field of the VHT Operation parameter of the AP or the corresponding AP in each setup link, respectively, in the MLME-START.request primitive.

In P802.11ax D7.0, we have an additional item h1) for each of these two subclauses:

h1) The SME shall refuse an association request from an HE STA that does not support all of the <HE-MCS, NSS> tuples indicated by the Basic HE-MCS And NSS Set field of the HE Operation parameter in the MLME-START.request primitive

h1) The SME shall refuse a reassociation request from an HE STA that does not support all of the <HE-MCS, NSS> tuples indicated by the Basic HE-MCS And NSS Set field of the HE Operation parameter in the MLME-START.request primitive.

May I know if you need to modify these two items h1) in your PDT text proposals too?

Regards,
Edward

On Wed, Aug 26, 2020 at 6:49 PM Huang, Po-kai <po-kai.huang@xxxxxxxxx> wrote:

Dear all,

The proposed spec texts for agreements in MLO-General and MLO-Multi-link setup: Procedure is uploaded.

https://mentor.ieee.org/802.11/dcn/20/11-20-1309-00-00be-proposed-draft-specification-for-ml-general-mld-authentication-mld-association-and-ml-setup.docx

Please take a look and let me know if you have further comments.

Best,

Po-Kai

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1